Hi Nishanth,
On 27/01/21 8:42 pm, Nishanth Menon wrote:
> On 20:38-20210127, Aswath Govindraju wrote:
>> Add support for the zeroth instance of GPIO subsystem in the main domain.
>>
>> Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx>
>
>
> I really dont want to pick up one patch per node instance. It is hard
> to scale and just creates a lot of noise.
>
As the main goal of the patch series was to add support for higher speed
modes in MMC, I added only the required ones. If required I will send a
follow up patch to add the remaining GPIO nodes.
Thanks,
Aswath
>> ---
>> arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 17 +++++++++++++++++
>> 1 file changed, 17 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
>> index 4cc2e9094d0e..75dffbb26d52 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
>> @@ -294,6 +294,23 @@
>> pinctrl-single,function-mask = <0xffffffff>;
>> };
>>
>> + main_gpio0: gpio@600000 {
>> + compatible = "ti,j721e-gpio", "ti,keystone-gpio";
>> + reg = <0x0 0x00600000 0x0 0x100>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-parent = <&main_gpio_intr>;
>> + interrupts = <145>, <146>, <147>, <148>,
>> + <149>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + ti,ngpio = <69>;
>> + ti,davinci-gpio-unbanked = <0>;
>> + power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
>> + clocks = <&k3_clks 105 0>;
>> + clock-names = "gpio";
>> + };
>> +
>> main_uart0: serial@2800000 {
>> compatible = "ti,j721e-uart", "ti,am654-uart";
>> reg = <0x00 0x02800000 0x00 0x100>;
>> --
>> 2.17.1
>>
>
