Hi, This series adds the compatible for SM8350 SoC, boardi, cpu, scm and aoss compatible. Then the base DTS for SM8350 SoC which contains clock (gcc, rpmh), pinctrl, uart, reserved memory and cpu nodes. The board file for MTP enables uart and adds the rpmh regulators Changes in v2: - Add ack by Rob recieved for v1 - Document cpu and scm compatible and use soc specific scm compatible - Fix errors pointed by Rob and make dtbs_check as well as W=1 compilation Vinod Koul (6): dt-bindings: arm: qcom: Document SM8350 SoC and boards soc: qcom: aoss: Add SM8350 compatible dt-bindings: arm: cpus: Add kryo685 compatible dt-bindings: firmware: scm: Add SM8250 and SM8350 compatible arm64: dts: qcom: Add basic devicetree support for SM8350 SoC arm64: dts: qcom: Add basic devicetree support for SM8350-MTP board .../devicetree/bindings/arm/cpus.yaml | 1 + .../devicetree/bindings/arm/qcom.yaml | 6 + .../devicetree/bindings/firmware/qcom,scm.txt | 2 + .../bindings/soc/qcom/qcom,aoss-qmp.txt | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 250 +++++++++ arch/arm64/boot/dts/qcom/sm8350.dtsi | 499 ++++++++++++++++++ drivers/soc/qcom/qcom_aoss.c | 1 + 8 files changed, 761 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sm8350-mtp.dts create mode 100644 arch/arm64/boot/dts/qcom/sm8350.dtsi -- 2.26.2
