This patch adds bindings for i.MX8qxp pixel link to DPI(PXL2DPI). Signed-off-by: Liu Ying <victor.liu@xxxxxxx> --- v2->v3: * Drop 'fsl,syscon' property. (Rob) * Mention the CSR module controls PXL2DPI. v1->v2: * Use graph schema. (Laurent) .../display/bridge/fsl,imx8qxp-pxl2dpi.yaml | 102 +++++++++++++++++++++ 1 file changed, 102 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml new file mode 100644 index 00000000..6112095 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8qxp-pxl2dpi.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/fsl,imx8qxp-pxl2dpi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8qxp Pixel Link to Display Pixel Interface + +maintainers: + - Liu Ying <victor.liu@xxxxxxx> + +description: | + The Freescale i.MX8qxp Pixel Link to Display Pixel Interface(PXL2DPI) + interfaces the pixel link 36-bit data output and the DSI controller’s + MIPI-DPI 24-bit data input, and inputs of LVDS Display Bridge(LDB) module + used in LVDS mode, to remap the pixel color codings between those modules. + This module is purely combinatorial. + + The i.MX8qxp PXL2DPI is controlled by Control and Status Registers(CSR) module. + The CSR module, as a system controller, contains the PXL2DPI's configuration + register. + +properties: + compatible: + const: fsl,imx8qxp-pxl2dpi + + power-domains: + maxItems: 1 + + fsl,companion-pxl2dpi: + $ref: /schemas/types.yaml#/definitions/phandle + description: | + A phandle which points to companion PXL2DPI which is used by downstream + LVDS Display Bridge(LDB) in split mode. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/properties/port + description: The PXL2DPI input port node from pixel link. + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: The PXL2DPI output port node to downstream bridge. + + required: + - port@0 + - port@1 + +required: + - compatible + - power-domains + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/firmware/imx/rsrc.h> + pxl2dpi { + compatible = "fsl,imx8qxp-pxl2dpi"; + power-domains = <&pd IMX_SC_R_MIPI_0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + mipi_lvds_0_pxl2dpi_dc_pixel_link0: endpoint@0 { + reg = <0>; + remote-endpoint = <&dc_pixel_link0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_dc_pixel_link1: endpoint@1 { + reg = <1>; + remote-endpoint = <&dc_pixel_link1_mipi_lvds_0_pxl2dpi>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { + reg = <0>; + remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; + }; + + mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { + reg = <1>; + remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; + }; + }; + }; + }; -- 2.7.4
