Re: [PATCH v3 2/2] PCI: rockchip: add DesignWare based PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Leon,

Thanks for your reply.

在 2021/1/26 2:45, Leon Romanovsky 写道:
On Mon, Jan 25, 2021 at 03:53:38PM +0000, Robin Murphy wrote:
On 2021-01-25 09:01, Leon Romanovsky wrote:
On Mon, Jan 25, 2021 at 02:40:10PM +0800, xxm wrote:
Hi Leon,

Thanks for your reply.

在 2021/1/25 13:48, Leon Romanovsky 写道:
On Mon, Jan 25, 2021 at 10:49:27AM +0800, Simon Xue wrote:
pcie-dw-rockchip is based on DWC IP. But pcie-rockchip-host
is Rockchip designed IP which is only used for RK3399. So all the following
non-RK3399 SoCs should use this driver.

Signed-off-by: Simon Xue <xxm@xxxxxxxxxxxxxx>
Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
---
    drivers/pci/controller/dwc/Kconfig            |   9 +
    drivers/pci/controller/dwc/Makefile           |   1 +
    drivers/pci/controller/dwc/pcie-dw-rockchip.c | 286 ++++++++++++++++++
    3 files changed, 296 insertions(+)
    create mode 100644 drivers/pci/controller/dwc/pcie-dw-rockchip.c

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 22c5529e9a65..aee408fe9283 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -214,6 +214,15 @@ config PCIE_ARTPEC6_EP
    	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
    	  endpoint mode. This uses the DesignWare core.

+config PCIE_ROCKCHIP_DW_HOST
+	bool "Rockchip DesignWare PCIe controller"
+	select PCIE_DW
+	select PCIE_DW_HOST
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on OF
+	help
+	  Enables support for the DW PCIe controller in the Rockchip SoC.
+
    config PCIE_INTEL_GW
    	bool "Intel Gateway PCIe host controller support"
    	depends on OF && (X86 || COMPILE_TEST)
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index a751553fa0db..30eef8e9ee8a 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
    obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
    obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
    obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
+obj-$(CONFIG_PCIE_ROCKCHIP_DW_HOST) += pcie-dw-rockchip.o
    obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
    obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
    obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
new file mode 100644
index 000000000000..07f6d1cd5853
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Rockchip SoCs
+ *
+ * Copyright (C) 2021 Rockchip Electronics Co., Ltd.
+ *		http://www.rock-chips.com
+ *
+ * Author: Simon Xue <xxm@xxxxxxxxxxxxxx>
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include "pcie-designware.h"
+
+/*
+ * The upper 16 bits of PCIE_CLIENT_CONFIG are a write
+ * mask for the lower 16 bits.  This allows atomic updates
+ * of the register without locking.
+ */
This is correct only for the variables that naturally aligned, I imagine
that this is the case here and in the Linux, but better do not write comments
in the code that are not accurate.
Ok, will remove.
I wonder what it would be when outside the Linux? Could you share some information?
The C standard says nothing about atomicity, integer assignment maybe atomic,
maybe it isn’t. There is no guarantee, plain integer assignment in C is non-atomic
by definition.

The atomicity of u32 is very dependent on hardware vendor, memory model and compiler,
for example x86 and ARMs guarantee atomicity for u32. This is why I said that probably
here (Linux) it is ok and you are not alone in expecting lockless write.
Huh? What do variables and the abstract machine of the C language
environment have to do with the definition of *hardware MMIO registers*? We
don't write to registers with plain integer assignment of u32, we use
writel() (precisely in order to bypass that abstract C environment).

I appreciate that the comment is not universally true if taken completely
out of context, but I that's true of pretty much all comments ever. If
someone really were trying to learn basic programming principles from random
comments in Linux drivers, then it's already a bit late for us to try and
save them from themselves.
So what? Does it mean that new code should have comments that are not
correct? As you can see from this conversation, even the author didn't
know what u32 isn’t guaranteed to be atomic, so yes, the comments should
be correct.

What I do know is writel() will do the right things(like mem barrier, atomic...) to update the registers correctly

in "ARM + Linux" platform. But I have no idear if out of  this specific platform, so I asked for more information to learn.

Anyway, I will keep the first part of comment to illustrate how to use PCIE_CLIENT_REGISTER, and remove the "atomic" part.

Thanks







[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux