Re: [PATCH v3 1/2] dt-bindings: rockchip: Add DesignWare based PCIe controller【请注意,邮件由robherring2@xxxxxxxxx代发】

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Rob,

Thanks for reply.

在 2021/1/25 23:26, Rob Herring 写道:
On Mon, Jan 25, 2021 at 10:48:24AM +0800, Simon Xue wrote:
Document DT bindings for PCIe controller found on Rockchip SoC.

Signed-off-by: Simon Xue <xxm@xxxxxxxxxxxxxx>
---
  .../bindings/pci/rockchip-dw-pcie.yaml        | 133 ++++++++++++++++++
  1 file changed, 133 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
new file mode 100644
index 000000000000..24ea42203c14
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe RC controller on Rockchip SoCs
+
+maintainers:
+  - Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
+  - Simon Xue <xxm@xxxxxxxxxxxxxx>
+  - Heiko Stuebner <heiko@xxxxxxxxx>
+
+description: |+
+  RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
+  PCIe IP and thus inherits all the common properties defined in
+  designware-pcie.txt.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+# We need a select here so we don't match all nodes with 'snps,dw-pcie'
+select:
+  properties:
+    compatible:
+      contains:
+        const: rockchip,rk3568-pcie
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: rockchip,rk3568-pcie
+      - const: snps,dw-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers
+      - description: Rockchip designed configuration registers
+
+  clocks:
+    items:
+      - description: AHB clock for PCIe master
+      - description: AHB clock for PCIe slave
+      - description: AHB clock for PCIe dbi
+      - description: APB clock for PCIe
+      - description: Auxiliary clock for PCIe
+
+  clock-names:
+    items:
+      - const: aclk_mst
+      - const: aclk_slv
+      - const: aclk_dbi
+      - const: pclk
+      - const: aux
+
+  msi-map: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    maxItems: 3
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: pipe
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - msi-map
+  - num-lanes
+  - phys
+  - phy-names
+  - power-domains
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie3x2: pcie@fe280000 {
+            compatible = "rockchip,rk3568-pcie", "snps,dw-pcie";
+            reg = <0x3 0xc0800000 0x0 0x400000>,
+                  <0x0 0xfe280000 0x0 0x10000>;
+            reg-names = "pcie-dbi", "pcie-apb";
I believe I already said use 'dbi'. The DBI is also not 4MB. The config
space goes here too, not in 'ranges'.

Sorry for missing  update in yaml.

I think yaml is used to describe the resources of specific SoC, it reserves 4MB for DBI on Rockchip SoC.

So, I think assign 4MB here is reasonable.

+            bus-range = <0x20 0x2f>;
+            clocks = <&cru 143>, <&cru 144>,
+                     <&cru 145>, <&cru 146>,
+                     <&cru 147>;
+            clock-names = "aclk_mst", "aclk_slv",
+                          "aclk_dbi", "pclk",
+                          "aux";
+            device_type = "pci";
+            linux,pci-domain = <2>;
+            max-link-speed = <2>;
+            msi-map = <0x2000 &its 0x2000 0x1000>;
+            num-lanes = <2>;
+            phys = <&pcie30phy>;
+            phy-names = "pcie-phy";
+            power-domains = <&power 15>;
+            ranges = <0x00000800 0x0 0x80000000 0x3 0x80000000 0x0 0x800000>,
+                     <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>,
+                     <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;
+            resets = <&cru 193>;
+            reset-names = "pipe";
+            #address-cells = <3>;
+            #size-cells = <2>;
+        };
+    };
+...
--
2.25.1










[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux