On Sun, 24 Jan 2021 at 18:03, Marek Vasut <marex@xxxxxxx> wrote: > > Add DT bindings to describe GPIO line associated with CMD, CK, CKIN pins. > > Signed-off-by: Marek Vasut <marex@xxxxxxx> > Cc: Alexandre Torgue <alexandre.torgue@xxxxxx> > Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> > Cc: Ludovic Barre <ludovic.barre@xxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx> > Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx > Cc: devicetree@xxxxxxxxxxxxxxx Applied for next, thanks! Kind regards Uffe > --- > V2: Rebase on next-20210122 > --- > .../devicetree/bindings/mmc/arm,pl18x.yaml | 20 +++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > index eddc1f6bdbe5..47595cb483be 100644 > --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml > @@ -127,6 +127,26 @@ properties: > driver to sample the receive data (for example with a voltage switch > transceiver). > > + st,cmd-gpios: > + maxItems: 1 > + description: > + The GPIO matching the CMD pin. > + > + st,ck-gpios: > + maxItems: 1 > + description: > + The GPIO matching the CK pin. > + > + st,ckin-gpios: > + maxItems: 1 > + description: > + The GPIO matching the CKIN pin. > + > +dependencies: > + st,cmd-gpios: [ "st,use-ckin" ] > + st,ck-gpios: [ "st,use-ckin" ] > + st,ckin-gpios: [ "st,use-ckin" ] > + > unevaluatedProperties: false > > required: > -- > 2.29.2 >
