On Thu, 21 Jan 2021 16:56:58 +0100, Mike Looijmans wrote: > This adds the device-tree bindings for the Bosch Sensortec BMI088 IMU, > the accelerometer part. > > Signed-off-by: Mike Looijmans <mike.looijmans@xxxxxxxx> > > --- > > Changes in v7: > Add additionalProperties > Change bmi088_accel to bmi088-accel > Add interrupt-names and adjust description > > Changes in v6: > I't been almost a year since the last commit, sorry... > Fixed the yaml errors > Add interrupt, vdd and vddio properties > > Changes in v5: > submit together with driver code as patch series > > Changes in v2: > convert to yaml format > > .../bindings/iio/accel/bosch,bmi088.yaml | 66 +++++++++++++++++++ > 1 file changed, 66 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.example.dt.yaml: bmi088-accel@1: 'spi-max-frequency' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/bosch,bmi088.yaml See https://patchwork.ozlabs.org/patch/1429940 This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
