Hi Daniel
Is it just me or something looks rather askew with the indentation of your dts' (e.g. tabs vs. spaces)?
Cheers
Marcel
On Thu, 2021-01-21 at 15:12 -0800, Daniel Walker wrote:
> Add Petra and Hellcat dts file. These platforms are based on
> the Xilinx Zynqmp platform.
>
> Signed-off-by: Daniel Walker <dwalker@xxxxxxxxxx>
> Cc: xe-linux-external@xxxxxxxxx
> ---
> arch/arm64/boot/dts/xilinx/Makefile | 2 +
> .../boot/dts/xilinx/zynqmp-petra-hellcat.dts | 856 ++++++++++++++++++
> arch/arm64/boot/dts/xilinx/zynqmp-petra.dts | 847 +++++++++++++++++
> 3 files changed, 1705 insertions(+)
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-petra-hellcat.dts
> create mode 100644 arch/arm64/boot/dts/xilinx/zynqmp-petra.dts
>
> diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
> index 60f5443f3ef4..d9eacb3c60e5 100644
> --- a/arch/arm64/boot/dts/xilinx/Makefile
> +++ b/arch/arm64/boot/dts/xilinx/Makefile
> @@ -15,3 +15,5 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu102-rev1.0.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu104-revA.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu106-revA.dtb
> dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-zcu111-revA.dtb
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-petra.dts
> +dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-petra-hellcat.dts
> diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-petra-hellcat.dts b/arch/arm64/boot/dts/xilinx/zynqmp-petra-
> hellcat.dts
> new file mode 100644
> index 000000000000..87e23c1cac65
> --- /dev/null
> +++ b/arch/arm64/boot/dts/xilinx/zynqmp-petra-hellcat.dts
> @@ -0,0 +1,856 @@
> +/*
> + * dts file for Cisco Petra-Hellcat Switching IOT platform
> + *
> + * (C) Copyright 2016-2018, Cisco Systems, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + */
> +
> +/dts-v1/;
> +
> +#include "zynqmp.dtsi"
> +#include "zynqmp-clk-ccf.dtsi"
> +
> +/*
> + ********************* PL *********************
> + */
> +
> +/ {
> + reserved-memory {
> + #address-cells = <0x2>;
> + #size-cells = <0x2>;
> + ranges;
> +
> + rproc@3ed00000 {
> + no-map;
> + reg = <0x0 0x3ed00000 0x0 0x1000000>;
> + };
> + zynqmp_sha_reserved: buffer@0 {
> + compatible = "shared-dma-pool";
> + no-map;
> + reg = <0x0 0x78000000 0x0 0x00020000>;
> + };
> + };
> +
> + sha384 {
> + compatible = "xlnx,zynqmp-keccak-384";
> + memory-region = <&zynqmp_sha_reserved>;
> + };
> +
> + amba_pl: amba_pl@0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges ;
> + design_1_i_axi_iic_BP: i2c@80104000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <0x3 0x47>;
Spaces above vs. tabs before.
> ...
