Add device tree binding Documentation details for Qualcomm SM8350 pinctrl driver. Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx> --- .../bindings/pinctrl/qcom,sm8350-pinctrl.yaml | 146 ++++++++++++++++++ 1 file changed, 146 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml new file mode 100644 index 000000000000..706bc79db60b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8350-pinctrl.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. SM8350 TLMM block + +maintainers: + - Vinod Koul <vkoul@xxxxxxxxxx> + +description: | + This binding describes the Top Level Mode Multiplexer (TLMM) block found + in the SM8350 platform. + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +properties: + compatible: + const: qcom,sm8350-tlmm + + reg: + maxItems: 1 + + interrupts: true + interrupt-controller: true + '#interrupt-cells': true + gpio-controller: true + gpio-reserved-ranges: true + '#gpio-cells': true + gpio-ranges: true + wakeup-parent: true + +required: + - compatible + - reg + +additionalProperties: false + +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-sm8350-tlmm-state" + - patternProperties: + ".*": + $ref: "#/$defs/qcom-sm8350-tlmm-state" + +'$defs': + qcom-sm8350-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state" + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] + minItems: 1 + maxItems: 36 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ atest_char, atest_usb, audio_ref, cam_mclk, cci_async, + cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng, + cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1, + ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, + gpio, ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0, + mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1, + mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, + mi2s1_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, + mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12, + mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6, + mss_grfc7, mss_grfc8, mss_grfc9, nav_gpio, pa_indicator, + pcie0_clkreqn, pcie1_clkreqn, phase_flag, pll_bist, pll_clk, + pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qlink0_enable, + qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request, + qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0, + qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10, + qup11, qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19, + qup2, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, + qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk, + sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2, + tgu_ch3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data, + uim0_present, uim0_reset, uim1_clk, uim1_data, uim1_present, + uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ] + + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + drive-strength: true + input-enable: true + output-high: true + output-low: true + phandle: true + + required: + - pins + - function + + additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl@f100000 { + compatible = "qcom,sm8350-tlmm"; + reg = <0x0f100000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 203>; + + gpio-wo-subnode-state { + pins = "gpio1"; + function = "gpio"; + }; + + uart-w-subnodes-state { + rx { + pins = "gpio18"; + function = "qup3"; + bias-pull-up; + }; + + tx { + pins = "gpio19"; + function = "qup3"; + bias-disable; + }; + }; + }; +... -- 2.26.2
