On 19/01/2021 18:39, Dave Gerlach wrote:
This is v2 of the series to add initial support for the latest new SoC, AM642, from Texas Instruments. Version 1 can be found at [1]. Additional detail can be found in the patch descriptions, also see AM64X Technical Reference Manual (SPRUIM2, Nov 2020) for further details: https://www.ti.com/lit/pdf/spruim2 Since v1, several new bindings have made it in linux-next so we can now include those nodes using them here. The spi, i2c, and mmc nodes have now been added along with DMA support. Specifics about changes from v1 are included with each patch. Regards, Dave [1] https://lore.kernel.org/linux-arm-kernel/20201125052004.17823-1-d-gerlach@xxxxxx/ Dave Gerlach (4): dt-bindings: arm: ti: Add bindings for AM642 SoC dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM64 arm64: dts: ti: Add support for AM642 SoC arm64: dts: ti: Add support for AM642 EVM Peter Ujfalusi (1): arm64: dts: ti: k3-am64-main: Enable DMA support .../devicetree/bindings/arm/ti/k3.yaml | 6 + arch/arm64/boot/dts/ti/Makefile | 2 + arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 406 ++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi | 76 ++++ arch/arm64/boot/dts/ti/k3-am64.dtsi | 103 +++++ arch/arm64/boot/dts/ti/k3-am642-evm.dts | 258 +++++++++++ arch/arm64/boot/dts/ti/k3-am642.dtsi | 65 +++ include/dt-bindings/pinctrl/k3.h | 5 +- 8 files changed, 920 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/ti/k3-am64-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am64.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am642.dtsi
Tested-by: Grygorii Strashko <grygorii.strashko@xxxxxx> Reviewed-by: Grygorii Strashko <grygorii.strashko@xxxxxx> -- Best regards, grygorii
