LX2160A supports two flexcan controllers. Add the support.
Enable support further for LX2160A-RDB/QDS.
Signed-off-by: Kuldeep Singh <kuldeep.singh@xxxxxxx>
---
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 8 ++++++++
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 16 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 24 +++++++++++++++++++++++
3 files changed, 48 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 16ae3b0..d858d9c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -33,6 +33,14 @@
};
};
+&can0 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
&crypto {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 6f82759..5dbf274 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -89,6 +89,22 @@
};
};
+&can0 {
+ status = "okay";
+
+ can-transceiver {
+ max-bitrate = <5000000>;
+ };
+};
+
+&can1 {
+ status = "okay";
+
+ can-transceiver {
+ max-bitrate = <5000000>;
+ };
+};
+
&esdhc0 {
sd-uhs-sdr104;
sd-uhs-sdr50;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 451e443..0551f6f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -895,6 +895,30 @@
status = "disabled";
};
+ can0: can@2180000 {
+ compatible = "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2180000 0x0 0x10000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>,
+ <&clockgen QORIQ_CLK_SYSCLK 0>;
+ clock-names = "ipg", "per";
+ fsl,clk-source = <0>;
+ status = "disabled";
+ };
+
+ can1: can@2190000 {
+ compatible = "fsl,lx2160ar1-flexcan";
+ reg = <0x0 0x2190000 0x0 0x10000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>,
+ <&clockgen QORIQ_CLK_SYSCLK 0>;
+ clock-names = "ipg", "per";
+ fsl,clk-source = <0>;
+ status = "disabled";
+ };
+
uart0: serial@21c0000 {
compatible = "arm,sbsa-uart","arm,pl011";
reg = <0x0 0x21c0000 0x0 0x1000>;
--
2.7.4
