Remove touchscreen-size-* properties. This values are not correct, event if it
works with ts_test tool, it fails to work properly with weston.
And the real range of values reported by the driver (or measured by the
controller) is close to max values and may change with time on resistive
panels. So, it make no sense to keep this values in the device tree.
Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6dl-plym2m.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl-plym2m.dts b/arch/arm/boot/dts/imx6dl-plym2m.dts
index 4d0d3d3386af..c97274f0df07 100644
--- a/arch/arm/boot/dts/imx6dl-plym2m.dts
+++ b/arch/arm/boot/dts/imx6dl-plym2m.dts
@@ -138,8 +138,6 @@ touchscreen@0 {
interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
- touchscreen-size-x = <800>;
- touchscreen-size-y = <480>;
touchscreen-inverted-x;
touchscreen-inverted-y;
touchscreen-max-pressure = <4095>;
--
2.30.0
