From: Sekhar Nori <nsekhar@xxxxxx>
With dtc 1.6.0, building TI device-tree files with W=2 results in warnings
like below for all interrupt controllers.
/bus@100000/bus@30000000/interrupt-controller1: Missing #address-cells in interrupt provider
Fix these by adding #address-cells = <0>; for all interrupt controllers in
TI device-tree files. Any other #address-cells value is really only needed
if interrupt-map property is being used (which is not the case for existing
TI device-tree files)
Reviewed-by: Lokesh Vutla <lokeshvutla@xxxxxx>
Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
Signed-off-by: Lokesh Vutla <lokeshvutla@xxxxxx>
---
Changes since v3:
- Dropped adding address-cells for pca9554 as it is introducing a new
warning.
arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 5 +++++
arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 2 ++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 3 +++
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 1 +
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 11 +++++++++++
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 3 +++
6 files changed, 25 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 12591a854020..85ae169ab0bb 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -439,6 +439,7 @@ intr_main_gpio: interrupt-controller0 {
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <100>;
ti,interrupt-ranges = <0 392 32>;
@@ -460,6 +461,7 @@ intr_main_navss: interrupt-controller1 {
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <182>;
ti,interrupt-ranges = <0 64 64>,
@@ -473,6 +475,7 @@ inta_main_udmass: interrupt-controller@33d00000 {
interrupt-parent = <&intr_main_navss>;
msi-controller;
#interrupt-cells = <0>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <179>;
ti,interrupt-ranges = <0 0 256>;
@@ -669,6 +672,7 @@ main_gpio0: gpio@600000 {
interrupts = <192>, <193>, <194>, <195>, <196>, <197>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <96>;
ti,davinci-gpio-unbanked = <0>;
clocks = <&k3_clks 57 0>;
@@ -684,6 +688,7 @@ main_gpio1: gpio@601000 {
interrupts = <200>, <201>, <202>, <203>, <204>, <205>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <90>;
ti,davinci-gpio-unbanked = <0>;
clocks = <&k3_clks 58 0>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index ed42f13e7663..7fe5782a1f79 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -75,6 +75,7 @@ intr_wkup_gpio: interrupt-controller2 {
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <156>;
ti,interrupt-ranges = <0 712 16>;
@@ -89,6 +90,7 @@ wkup_gpio0: gpio@42110000 {
interrupts = <60>, <61>, <62>, <63>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <56>;
ti,davinci-gpio-unbanked = <0>;
clocks = <&k3_clks 59 0>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 4cc2e9094d0e..421e2fa3e78f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -74,6 +74,7 @@ main_gpio_intr: interrupt-controller0 {
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <131>;
ti,interrupt-ranges = <8 392 56>;
@@ -92,6 +93,7 @@ main_navss_intr: interrupt-controller1 {
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <213>;
ti,interrupt-ranges = <0 64 64>,
@@ -104,6 +106,7 @@ main_udmass_inta: msi-controller@33d00000 {
reg = <0x00 0x33d00000 0x00 0x100000>;
interrupt-controller;
#interrupt-cells = <0>;
+ #address-cells = <0>;
interrupt-parent = <&main_navss_intr>;
msi-controller;
ti,sci = <&dmsc>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 359e3e8a8cd0..0a8df7e4739c 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -102,6 +102,7 @@ wkup_gpio_intr: interrupt-controller2 {
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <137>;
ti,interrupt-ranges = <16 960 16>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 2d526ea44a85..b527874929a2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -82,6 +82,7 @@ main_gpio_intr: interrupt-controller0 {
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <131>;
ti,interrupt-ranges = <8 392 56>;
@@ -103,6 +104,7 @@ main_navss_intr: interrupt-controller1 {
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <213>;
ti,interrupt-ranges = <0 64 64>,
@@ -117,6 +119,7 @@ main_udmass_inta: interrupt-controller@33d00000 {
interrupt-parent = <&main_navss_intr>;
msi-controller;
#interrupt-cells = <0>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <209>;
ti,interrupt-ranges = <0 0 256>;
@@ -910,6 +913,7 @@ main_gpio0: gpio@600000 {
<260>, <261>, <262>, <263>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
@@ -926,6 +930,7 @@ main_gpio1: gpio@601000 {
interrupts = <288>, <289>, <290>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
@@ -943,6 +948,7 @@ main_gpio2: gpio@610000 {
<268>, <269>, <270>, <271>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
@@ -959,6 +965,7 @@ main_gpio3: gpio@611000 {
interrupts = <292>, <293>, <294>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 108 TI_SCI_PD_EXCLUSIVE>;
@@ -976,6 +983,7 @@ main_gpio4: gpio@620000 {
<276>, <277>, <278>, <279>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
@@ -992,6 +1000,7 @@ main_gpio5: gpio@621000 {
interrupts = <296>, <297>, <298>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
@@ -1009,6 +1018,7 @@ main_gpio6: gpio@630000 {
<284>, <285>, <286>, <287>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <128>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
@@ -1025,6 +1035,7 @@ main_gpio7: gpio@631000 {
interrupts = <300>, <301>, <302>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <36>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index 6c44afae9187..59820c4290c5 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -102,6 +102,7 @@ wkup_gpio_intr: interrupt-controller2 {
interrupt-controller;
interrupt-parent = <&gic500>;
#interrupt-cells = <1>;
+ #address-cells = <0>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <137>;
ti,interrupt-ranges = <16 960 16>;
@@ -116,6 +117,7 @@ wkup_gpio0: gpio@42110000 {
interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <84>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
@@ -132,6 +134,7 @@ wkup_gpio1: gpio@42100000 {
interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
interrupt-controller;
#interrupt-cells = <2>;
+ #address-cells = <0>;
ti,ngpio = <84>;
ti,davinci-gpio-unbanked = <0>;
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
--
2.30.0
