Several properties are shared between all TLMM bindings. By providing a common binding to define these properties each platform's binding can be reduced to just listing which of these properties should be checked for - or further specified. Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> --- .../bindings/pinctrl/qcom,tlmm-common.yaml | 85 +++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml new file mode 100644 index 000000000000..ab44952418ad --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,tlmm-common.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,tlmm-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. TLMM definitions + +maintainers: + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> + +description: + This defines the common properties used to describe all Qualcomm TLMM + bindings and pinconf/pinmux states for these. + +properties: + interrupts: + description: Specifies the TLMM summary IRQ + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + + gpio-controller: true + + '#gpio-cells': + description: + Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + gpio-ranges: + maxItems: 1 + + wakeup-parent: + description: + Specifying the interrupt-controller used to wake up the system when the + TLMM block has been powered down. + maxItems: 1 + + gpio-reserved-ranges: + description: + Pins can be reserved for trusted applications and thereby unaccessible + from the OS. This property can be used to mark the pins which resources + should not be accessed by the OS. Please see the ../gpio/gpio.txt for more + information. + +required: + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: true + +$defs: + qcom-tlmm-state: + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + properties: + drive-strength: + enum: [2, 4, 6, 8, 10, 12, 14, 16] + default: 2 + description: + Selects the drive strength for the specified pins, in mA. + + bias-pull-down: true + bias-pull-up: true + bias-disable: true + input-enable: true + output-high: true + output-low: true + phandle: true + + additionalProperties: true +... -- 2.29.2
