Re: [PATCH 2/3] dt-bindings: rockchip: Add DesignWare based PCIe controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Simon,

Thank you for this patch for rk3568 pcie.

Include the Rockchip device tree maintainer and all other people/lists
to the CC list.

./scripts/checkpatch.pl --strict <patch1> <patch2>

 ./scripts/get_maintainer.pl --noroles --norolestats --nogit-fallback
--nogit <patch1> <patch2>

git send-email --suppress-cc all --dry-run --annotate --to
heiko@xxxxxxxxx --cc <..> <patch1> <patch2>

This SoC has no support in mainline linux kernel yet.
In all the following yaml documents for rk3568 we need headers with
defines for clocks and power domains, etc.

For example:
#include <dt-bindings/clock/rk3568-cru.h>
#include <dt-bindings/power/rk3568-power.h>

Could Rockchip submit first clocks and power drivers entries and a basic
rk3568.dtsi + evb dts?
Include a patch to this serie with 3 pcie nodes added to rk3568.dtsi.

A dtbs_check only works with a complete dtsi and evb dts.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml

On 1/18/21 10:17 AM, Simon Xue wrote:
> Signed-off-by: Simon Xue <xxm@xxxxxxxxxxxxxx>
> ---
>  .../bindings/pci/rockchip-dw-pcie.yaml        | 101 ++++++++++++++++++
>  1 file changed, 101 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> new file mode 100644
> index 000000000000..fa664cfffb29
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> @@ -0,0 +1,101 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: DesignWare based PCIe RC controller on Rockchip SoCs
> +

> +maintainers:
> +  - Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
> +  - Simon Xue <xxm@xxxxxxxxxxxxxx>

maintainers:
  - Heiko Stuebner <heiko@xxxxxxxxx>

Add only people with maintainer rights.


allOf:
  - $ref: /schemas/pci/pci-bus.yaml#

designware-pcie.txt is in need for conversion to yaml.
Include the things that are needed in this document for now.

> +
> +# We need a select here so we don't match all nodes with 'snps,dw-pcie'
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        const: rockchip,rk3568-pcie
> +  required:
> +    - compatible
> +
> +properties:
> +  compatible:

> +    enum:
> +      - rockchip,rk3568-pcie
> +      - snps,dw-pcie

    items:
      - const: rockchip,rk3568-pcie
      - const: snps,dw-pcie

> +
> +  reg:
> +    maxItems: 1

    interrupts:
      - description:
      - description:
      - description:
      - description:
      - description:

  interrupt-names:    items:
      - const: sys
      - const: pmc
      - const: msg
      - const: legacy
      - const: err

> +
> +  clocks:
> +    items:
> +      - description: AHB clock for PCIe master
> +      - description: AHB clock for PCIe slave
> +      - description: AHB clock for PCIe dbi
> +      - description: APB clock for PCIe
> +      - description: Auxiliary clock for PCIe
> +
> +  clock-names:
> +    items:
> +      - const: aclk_mst
> +      - const: aclk_slv
> +      - const: aclk_dbi
> +      - const: pclk
> +      - const: aux
> +


  msi-map: true

  power-domains:
    maxItems: 1

> +  resets:	maxItems: 1

> +    items:
> +      - description: PCIe pipe reset line

remove

> +
> +  reset-names:
	const: pipe

> +    items:
> +      - const: pipe

remove

> +
> +required:
> +  - compatible

> +  - "#address-cells"
> +  - "#size-cells"

already required in pci-bus.yaml

> +  - bus-range
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names

> +  - msi-map

not defined in pci-bus.yaml and designware-pcie.txt
add to document

> +  - num-lanes

> +  - phys
> +  - phy-names

not defined in pci-bus.yaml and designware-pcie.txt
add to document

   - power-domains

> +  - ranges

already required in pci-bus.yaml

> +  - resets
> +  - reset-names
> +

> +additionalProperties: false

unevaluatedProperties: false

If other documents are included use unevaluatedProperties.

> +
> +examples:
> +  - |

#include <dt-bindings/clock/rk3568-cru.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/rk3568-power.h>

Missing defines


    bus {
        #address-cells = <2>;
        #size-cells = <2>;

dt-check uses standard 32 bit regs
this example is for 64 bit

> +    pcie3x2: pcie@fe280000 {
> +      compatible = "rockchip,rk3568-pcie", "snps,dw-pcie";

> +      #address-cells = <3>;
> +      #size-cells = <2>;

sort things that start with # below

> +      bus-range = <0x20 0x2f>;

sort order is:
compatible
reg
interrupt
the rest in alphabetical order
things with #
no status in yaml examples


> +      reg = <0x3 0xc0800000 0x0 0x400000>,
> +            <0x0 0xfe280000 0x0 0x10000>;
> +      reg-names = "pcie-dbi", "pcie-apb";

		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "sys", "pmc", "msg", "legacy", "err";

> +      clocks = <&cru ACLK_PCIE30X2_MST>, <&cru ACLK_PCIE30X2_SLV>,
> +               <&cru ACLK_PCIE30X2_DBI>, <&cru PCLK_PCIE30X2>,
> +               <&cru CLK_PCIE30X2_AUX_NDFT>;
> +      clock-names = "aclk_mst", "aclk_slv",
> +                    "aclk_dbi", "pclk",
> +                    "aux";
> +      msi-map = <0x2000 &its 0x2000 0x1000>;
> +      num-lanes = <2>;
> +      phys = <&pcie30phy>;
> +      phy-names = "pcie-phy";

    power-domains = <&power RK3568_PD_PIPE>;

> +      ranges = <0x00000800 0x0 0x80000000 0x3 0x80000000 0x0 0x800000
> +                0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000
> +                0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;
> +      resets = <&cru SRST_PCIE30X2_POWERUP>;
> +      reset-names = "pipe";
> +    };

};

> +
> +...
> 

Make sure that all properties that show up in this node are checked!

	pcie2x1: pcie@fe260000 {
		compatible = "rockchip,rk3568-pcie", "snps,dw-pcie";
		#address-cells = <3>;
		#size-cells = <2>;
		bus-range = <0x0 0xf>;
		clocks = <&cru ACLK_PCIE20_MST>, <&cru ACLK_PCIE20_SLV>,
			 <&cru ACLK_PCIE20_DBI>, <&cru PCLK_PCIE20>,
			 <&cru CLK_PCIE20_AUX_NDFT>;
		clock-names = "aclk_mst", "aclk_slv",
			      "aclk_dbi", "pclk", "aux";
		device_type = "pci";
		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
		linux,pci-domain = <0>;
		num-ib-windows = <6>;
		num-ob-windows = <2>;
		max-link-speed = <2>;
		msi-map = <0x0 &its 0x0 0x1000>;
		num-lanes = <1>;
		phys = <&combphy2_psq PHY_TYPE_PCIE>;
		phy-names = "pcie-phy";
		power-domains = <&power RK3568_PD_PIPE>;
		ranges = <0x00000800 0x0 0x00000000 0x3 0x00000000 0x0 0x800000
			  0x81000000 0x0 0x00800000 0x3 0x00800000 0x0 0x100000
			  0x83000000 0x0 0x00900000 0x3 0x00900000 0x0 0x3f700000>;
		reg = <0x3 0xc0000000 0x0 0x400000>,
		      <0x0 0xfe260000 0x0 0x10000>;
		reg-names = "pcie-dbi", "pcie-apb";
		resets = <&cru SRST_PCIE20_POWERUP>;
		reset-names = "pipe";
		status = "disabled";
	};



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux