Hello, did this maybe slip through the cracks? On 13.11.20 16:28, Ahmad Fatoum wrote: > The SoC dtsi lists a NOP USB PHY for each of the two HSIC-only USB > controllers. Their device tree node doesn't indicate a vcc-supply > resulting in: > > usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator > usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator > > warnings on boot up. The USB IP vcc-supply - separate from the vusb - is > hardwired to LDO_2P5[1], which we already have a device tree node for. > Reference it for the dummy "phy" as well. > > This will lead to breakage (probe deferment) for kernels that: > - Use a HSIC USB controller > - Use this new device tree > - but have CONFIG_REGULATOR_ANATOP disabled > > Because while the regulator is always-on, it can't be resolved when > there is no driver for it. > > As there are > > - no affected upstream device trees > - existing device trees are unaffected without recompilation > - disabling CONFIG_REGULATOR_ANATOP is explicitly a non-recommended > configuration per symbol help text > > this potential breakage is deemed acceptable. > > [1]: i.MX 6Dual/6Quad Reference Manual, Rev. C, > Figure 53-1. Power System Overview > > Cc: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> > Signed-off-by: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/imx6qdl.dtsi | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi > index 43edbf1156c7..22e4c142de13 100644 > --- a/arch/arm/boot/dts/imx6qdl.dtsi > +++ b/arch/arm/boot/dts/imx6qdl.dtsi > @@ -131,11 +131,13 @@ pmu: pmu { > > usbphynop1: usbphynop1 { > compatible = "usb-nop-xceiv"; > + vcc-supply = <®_vdd2p5>; > #phy-cells = <0>; > }; > > usbphynop2: usbphynop2 { > compatible = "usb-nop-xceiv"; > + vcc-supply = <®_vdd2p5>; > #phy-cells = <0>; > }; > > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |