On Fri 15 Jan 11:47 CST 2021, Jack Pham wrote: > Add the compatible strings for the USB3 PHYs found on SM8150, SM8250 > and SM8350 SoCs. These require separate subschemas due to the different > required clock entries. > > Note the SM8150 and SM8250 compatibles have already been in place in > the dts as well as the driver implementation but were missing from > the documentation. > Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx> Regards, Bjorn > Signed-off-by: Jack Pham <jackp@xxxxxxxxxxxxxx> > --- > .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 67 +++++++++++++++++++ > 1 file changed, 67 insertions(+) > > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > index 390df23b82e7..841c72863b4f 100644 > --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml > @@ -30,15 +30,24 @@ properties: > - qcom,sdm845-qmp-ufs-phy > - qcom,sdm845-qmp-usb3-uni-phy > - qcom,sm8150-qmp-ufs-phy > + - qcom,sm8150-qmp-usb3-phy > + - qcom,sm8150-qmp-usb3-uni-phy > - qcom,sm8250-qmp-ufs-phy > - qcom,sm8250-qmp-gen3x1-pcie-phy > - qcom,sm8250-qmp-gen3x2-pcie-phy > - qcom,sm8250-qmp-modem-pcie-phy > + - qcom,sm8250-qmp-usb3-phy > + - qcom,sm8250-qmp-usb3-uni-phy > + - qcom,sm8350-qmp-usb3-phy > + - qcom,sm8350-qmp-usb3-uni-phy > - qcom,sdx55-qmp-usb3-uni-phy > > reg: > + minItems: 1 > + maxItems: 2 > items: > - description: Address and length of PHY's common serdes block. > + - description: Address and length of PHY's DP_COM control block. > > "#clock-cells": > enum: [ 1, 2 ] > @@ -287,6 +296,64 @@ allOf: > reset-names: > items: > - const: phy > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,sm8150-qmp-usb3-phy > + - qcom,sm8150-qmp-usb3-uni-phy > + - qcom,sm8250-qmp-usb3-uni-phy > + - qcom,sm8350-qmp-usb3-uni-phy > + then: > + properties: > + clocks: > + items: > + - description: Phy aux clock. > + - description: 19.2 MHz ref clk source. > + - description: 19.2 MHz ref clk. > + - description: Phy common block aux clock. > + clock-names: > + items: > + - const: aux > + - const: ref_clk_src > + - const: ref > + - const: com_aux > + resets: > + items: > + - description: reset of phy block. > + - description: phy common block reset. > + reset-names: > + items: > + - const: phy > + - const: common > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,sm8250-qmp-usb3-phy > + - qcom,sm8350-qmp-usb3-phy > + then: > + properties: > + clocks: > + items: > + - description: Phy aux clock. > + - description: 19.2 MHz ref clk. > + - description: Phy common block aux clock. > + clock-names: > + items: > + - const: aux > + - const: ref_clk_src > + - const: com_aux > + resets: > + items: > + - description: reset of phy block. > + - description: phy common block reset. > + reset-names: > + items: > + - const: phy > + - const: common > > examples: > - | > -- > 2.24.0 >
