1. Change the node name of the thermal zone to match
'^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', add suffix "-thermal".
2. Change the node name of the trip point to match
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', delete character "@".
Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
---
arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 6 +++---
arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 6 +++---
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
index bfb1375426d2b58..8b8d3d07b67fe84 100644
--- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi
@@ -1113,7 +1113,7 @@
thermal-zones {
- cls0: cls0 {
+ cls0: cls0-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
sustainable-power = <4500>;
@@ -1122,13 +1122,13 @@
thermal-sensors = <&tsensor 1>;
trips {
- threshold: trip-point@0 {
+ threshold: trip-point0 {
temperature = <65000>;
hysteresis = <1000>;
type = "passive";
};
- target: trip-point@1 {
+ target: trip-point1 {
temperature = <75000>;
hysteresis = <1000>;
type = "passive";
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index f9953303a3f44dc..d426c6c8722b307 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -872,7 +872,7 @@
thermal-zones {
- cls0: cls0 {
+ cls0: cls0-thermal {
polling-delay = <1000>;
polling-delay-passive = <100>;
sustainable-power = <3326>;
@@ -881,13 +881,13 @@
thermal-sensors = <&tsensor 2>;
trips {
- threshold: trip-point@0 {
+ threshold: trip-point0 {
temperature = <65000>;
hysteresis = <0>;
type = "passive";
};
- target: trip-point@1 {
+ target: trip-point1 {
temperature = <75000>;
hysteresis = <0>;
type = "passive";
--
1.8.3
