Per mmc-controller.yaml, the node pattern is "^mmc(@.*)?$" ,
so adjust the node.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
Cc: Alexandre Torgue <alexandre.torgue@xxxxxx>
Cc: Ludovic Barre <ludovic.barre@xxxxxx>
Cc: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Cc: linux-stm32@xxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cc: devicetree@xxxxxxxxxxxxxxx
---
arch/arm/boot/dts/stm32f429.dtsi | 2 +-
arch/arm/boot/dts/stm32f746.dtsi | 4 ++--
arch/arm/boot/dts/stm32mp151.dtsi | 6 +++---
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index ad715a0e1c9a..f6530d724d00 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -566,7 +566,7 @@ adc3: adc@200 {
};
};
- sdio: sdio@40012c00 {
+ sdio: mmc@40012c00 {
compatible = "arm,pl180", "arm,primecell";
arm,primecell-periphid = <0x00880180>;
reg = <0x40012c00 0x400>;
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
index 640ff54ed00c..e1df603fc981 100644
--- a/arch/arm/boot/dts/stm32f746.dtsi
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -473,7 +473,7 @@ usart6: serial@40011400 {
status = "disabled";
};
- sdio2: sdio2@40011c00 {
+ sdio2: mmc@40011c00 {
compatible = "arm,pl180", "arm,primecell";
arm,primecell-periphid = <0x00880180>;
reg = <0x40011c00 0x400>;
@@ -484,7 +484,7 @@ sdio2: sdio2@40011c00 {
status = "disabled";
};
- sdio1: sdio1@40012c00 {
+ sdio1: mmc@40012c00 {
compatible = "arm,pl180", "arm,primecell";
arm,primecell-periphid = <0x00880180>;
reg = <0x40012c00 0x400>;
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 8c2a5d0875d8..33777a80799a 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -1055,7 +1055,7 @@ adc2: adc@100 {
};
};
- sdmmc3: sdmmc@48004000 {
+ sdmmc3: mmc@48004000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x48004000 0x400>;
@@ -1375,7 +1375,7 @@ qspi: spi@58003000 {
status = "disabled";
};
- sdmmc1: sdmmc@58005000 {
+ sdmmc1: mmc@58005000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x58005000 0x1000>;
@@ -1390,7 +1390,7 @@ sdmmc1: sdmmc@58005000 {
status = "disabled";
};
- sdmmc2: sdmmc@58007000 {
+ sdmmc2: mmc@58007000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x00253180>;
reg = <0x58007000 0x1000>;
--
2.29.2
