This is another set of updates in order to maintain support for the Librem 5 phone: Guido Günther (5): arm64: defconfig: Enable vibra-pwm arm64: dts: imx8mq-librem5: Mark charger IRQ as High-Z arm64: dts: imx8mq-librem5: Don't mark buck3 as always on arm64: dts: imx8mq-librem5: Add usb-c chip as supplier for the charger arm64: dts: imx8mq-librem5: Add LCD_1V8 regulator Martin Kepplinger (4): arm64: dts: imx8mq-librem5: enable the LCD panel arm64: dts: imx8mq-librem5: set regulators boot-on arm64: dts: Add Librem5 Evergreen dt-bindings: arm: fsl: Add the librem 5 Evergreen revision .../devicetree/bindings/arm/fsl.yaml | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8mq-librem5-r4.dts | 35 ++++++++ .../boot/dts/freescale/imx8mq-librem5.dtsi | 83 ++++++++++++++++++- arch/arm64/configs/defconfig | 1 + 5 files changed, 117 insertions(+), 4 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-librem5-r4.dts -- 2.20.1