On Mon, Jan 11, 2021 at 7:04 PM Russell King - ARM Linux admin <linux@xxxxxxxxxxxxxxx> wrote: > > FYI, Documentation/driver-api/gpio/consumer.rst says: > > For output GPIOs, the value provided becomes the initial output value. > This helps avoid signal glitching during system startup. > > Setting the pin to be an output, and then setting its initial value > does not avoid the glitch. You may wish to investigate whether you > can set the value before setting the pin as an output to avoid this > issue. > So, setting the Output Enable bit _after_ setting the direction and initial value should avoid this issue. Right?
