changes v7: - add Acked-by: Rob Herring to the firs patch - imx6qdl-vicut1.dtsi: add missing KEY_POWER - imx6dl-victgo.dts: add missing gpio flags to rotary-encoder - imx6dl-victgo.dts: rename video@5c to video-decoder@5c - imx6dl-victgo.dts: sort out some spaces changes v6: - move startup-delay-us close to gpio property - imx6qdl-vicut1.dtsi: rename video@5c to video-decoder@5c - imx6qdl-vicut1.dtsi: sort out some spaces - use defines for linux,code and linux,axis changes v5: - reorder kvg prefix - add Acked-by: Rob Herring.. changes v4: - fix active level of SPI CS GPIOs changes v3: - add vicutp board - change tvnorm to sdtv-standards - change linux,default-trigger "mmc" to "disk-activity"; - add power-supply property to the panel node changes v2: - add victgo board - diff fixes for vicut1.dtsi Oleksij Rempel (5): dt-bindings: vendor-prefixes: Add an entry for Kverneland Group dt-bindings: arm: fsl: add Kverneland UT1, UT1Q and UI1P boards ARM: dts: add Kverneland UT1, UT1Q and UT1P dt-bindings: arm: fsl: add Kverneland TGO board ARM: dts: add Kverneland TGO board .../devicetree/bindings/arm/fsl.yaml | 4 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 4 + arch/arm/boot/dts/imx6dl-victgo.dts | 852 ++++++++++++++++++ arch/arm/boot/dts/imx6dl-vicut1.dts | 13 + arch/arm/boot/dts/imx6q-vicut1.dts | 17 + arch/arm/boot/dts/imx6qdl-vicut1.dtsi | 803 +++++++++++++++++ arch/arm/boot/dts/imx6qp-vicutp.dts | 13 + 8 files changed, 1708 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-victgo.dts create mode 100644 arch/arm/boot/dts/imx6dl-vicut1.dts create mode 100644 arch/arm/boot/dts/imx6q-vicut1.dts create mode 100644 arch/arm/boot/dts/imx6qdl-vicut1.dtsi create mode 100644 arch/arm/boot/dts/imx6qp-vicutp.dts -- 2.30.0
