On Thu, Jan 07, 2021 at 10:12:07AM +0100, Teresa Remmet wrote: > Fourth version for the initial support for the SoM phyCORE-i.MX8MP > and the carrier board phyBOARD-Pollux. > > Changes in v4: > - resolved defconfig conflict adding PCA9532 during rebase to v5.11-rc2 > - removed unneeded status properties in device trees > - removed upstream not available i2c rtc property > - fixed i2c rtc trickle-resistor value > > Changes in v3: > - removed deprecated led label property > - added Reviewed-by and Acked-by tags > > Changes in v2: > - add rv3028 as module instead of buildin in defconfig > - updated commit message of rv3028 accordingly > - changed entries of device tree binding documentation to "const" > and fixed order > - fixed led dimmer node name > - removed rtc clock node > - fixed pmic node name > - removed reg entries in pmic regulator nodes > - removed clock entry from rtc node > - moved muxing of enable gpio for sd-card regulator to the proper node > - squashed imx8mp-phyboard-pollux.dtsi into imx8mp-phyboard-pollux-rdk.dts > > Teresa > > Teresa Remmet (4): > arm64: defconfig: Enable rv3028 i2c rtc driver > arm64: defconfig: Enable PCA9532 support > bindings: arm: fsl: Add PHYTEC i.MX8MP devicetree bindings > arm64: dts: freescale: Add support for phyBOARD-Pollux-i.MX8MP Applied all, thanks.
