Some components (like PCIe) are not used on all devices and
with a certain firmware configuration they might end up triggering
a force reboot or a Synchronous Abort.
This commit brings no functional difference as the nodes are
enabled on devices which didn't disable them previously.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi | 16 ++++++++++++++++
arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi | 10 ++++++++++
arch/arm64/boot/dts/qcom/msm8998.dtsi | 6 +++++-
3 files changed, 31 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 00d84fb21798..b500f24d47bc 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -74,6 +74,14 @@ &CPU7 {
cpu-idle-states = <&BIG_CPU_SLEEP_1>;
};
+&pcie0 {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&pm8005_lsid1 {
pm8005-regulators {
compatible = "qcom,pm8005-regulators";
@@ -295,6 +303,14 @@ &sdhc2 {
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
};
+&ufshc {
+ status = "okay";
+};
+
+&ufsphy {
+ status = "okay";
+};
+
&usb3 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
index cec42437b302..c1ef0c71d5f5 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi
@@ -106,6 +106,14 @@ &funnel5 {
// status = "okay";
};
+&pcie0 {
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&pm8005_lsid1 {
pm8005-regulators {
compatible = "qcom,pm8005-regulators";
@@ -345,6 +353,7 @@ &stm {
};
&ufshc {
+ status = "okay";
vcc-supply = <&vreg_l20a_2p95>;
vccq-supply = <&vreg_l26a_1p2>;
vccq2-supply = <&vreg_s4a_1p8>;
@@ -354,6 +363,7 @@ &ufshc {
};
&ufsphy {
+ status = "okay";
vdda-phy-supply = <&vreg_l1a_0p875>;
vdda-pll-supply = <&vreg_l2a_1p2>;
vddp-ref-clk-supply = <&vreg_l26a_1p2>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index b2481043205a..65c87a8be5a2 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -945,6 +945,7 @@ pcie0: pci@1c00000 {
num-lanes = <1>;
phys = <&pciephy>;
phy-names = "pciephy";
+ status = "disabled";
ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>,
<0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>;
@@ -970,11 +971,12 @@ pcie0: pci@1c00000 {
perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
};
- phy@1c06000 {
+ pcie_phy: phy@1c06000 {
compatible = "qcom,msm8998-qmp-pcie-phy";
reg = <0x01c06000 0x18c>;
#address-cells = <1>;
#size-cells = <1>;
+ status = "disabled";
ranges;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
@@ -1007,6 +1009,7 @@ ufshc: ufshc@1da4000 {
phy-names = "ufsphy";
lanes-per-direction = <2>;
power-domains = <&gcc UFS_GDSC>;
+ status = "disabled";
#reset-cells = <1>;
clock-names =
@@ -1046,6 +1049,7 @@ ufsphy: phy@1da7000 {
reg = <0x01da7000 0x18c>;
#address-cells = <1>;
#size-cells = <1>;
+ status = "disabled";
ranges;
clock-names =
--
2.29.2
