This is the usual way of handling pin configuration upstream now, so
align to it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8998-pins.dtsi | 108 ---------------------
arch/arm64/boot/dts/qcom/msm8998.dtsi | 106 +++++++++++++++++++-
2 files changed, 104 insertions(+), 110 deletions(-)
delete mode 100644 arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
diff --git a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
deleted file mode 100644
index 7c222cbf19d9..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8998-pins.dtsi
+++ /dev/null
@@ -1,108 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright (c) 2018, The Linux Foundation. All rights reserved. */
-
-&tlmm {
- sdc2_clk_on: sdc2_clk_on {
- config {
- pins = "sdc2_clk";
- bias-disable; /* NO pull */
- drive-strength = <16>; /* 16 mA */
- };
- };
-
- sdc2_clk_off: sdc2_clk_off {
- config {
- pins = "sdc2_clk";
- bias-disable; /* NO pull */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_cmd_on: sdc2_cmd_on {
- config {
- pins = "sdc2_cmd";
- bias-pull-up; /* pull up */
- drive-strength = <10>; /* 10 mA */
- };
- };
-
- sdc2_cmd_off: sdc2_cmd_off {
- config {
- pins = "sdc2_cmd";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_data_on: sdc2_data_on {
- config {
- pins = "sdc2_data";
- bias-pull-up; /* pull up */
- drive-strength = <10>; /* 10 mA */
- };
- };
-
- sdc2_data_off: sdc2_data_off {
- config {
- pins = "sdc2_data";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_cd_on: sdc2_cd_on {
- mux {
- pins = "gpio95";
- function = "gpio";
- };
-
- config {
- pins = "gpio95";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- sdc2_cd_off: sdc2_cd_off {
- mux {
- pins = "gpio95";
- function = "gpio";
- };
-
- config {
- pins = "gpio95";
- bias-pull-up; /* pull up */
- drive-strength = <2>; /* 2 mA */
- };
- };
-
- blsp1_uart3_on: blsp1_uart3_on {
- tx {
- pins = "gpio45";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
-
- rx {
- pins = "gpio46";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
-
- cts {
- pins = "gpio47";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
-
- rfr {
- pins = "gpio48";
- function = "blsp_uart3_a";
- drive-strength = <2>;
- bias-disable;
- };
- };
-};
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index ebdaaf1dfca4..699bd67efcd0 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1073,6 +1073,110 @@ tlmm: pinctrl@3400000 {
#gpio-cells = <0x2>;
interrupt-controller;
#interrupt-cells = <0x2>;
+
+ sdc2_clk_on: sdc2_clk_on {
+ config {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+ };
+
+ sdc2_clk_off: sdc2_clk_off {
+ config {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_cmd_on: sdc2_cmd_on {
+ config {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_cmd_off: sdc2_cmd_off {
+ config {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_data_on: sdc2_data_on {
+ config {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+ };
+
+ sdc2_data_off: sdc2_data_off {
+ config {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_cd_on: sdc2_cd_on {
+ mux {
+ pins = "gpio95";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio95";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ sdc2_cd_off: sdc2_cd_off {
+ mux {
+ pins = "gpio95";
+ function = "gpio";
+ };
+
+ config {
+ pins = "gpio95";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
+
+ blsp1_uart3_on: blsp1_uart3_on {
+ tx {
+ pins = "gpio45";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rx {
+ pins = "gpio46";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cts {
+ pins = "gpio47";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rfr {
+ pins = "gpio48";
+ function = "blsp_uart3_a";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
};
remoteproc_mss: remoteproc@4080000 {
@@ -2110,5 +2214,3 @@ wifi: wifi@18800000 {
};
};
};
-
-#include "msm8998-pins.dtsi"
--
2.29.2
