[PATCH v2 0/2] ARM: topology: Allow to set the frequency through a clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

This patch series add the possibility for the topology code to get the
CPU frequency through a DT clock handle instead of needing a
clock-frequency property.

Indeed, this information can be quite redundant if the clock tree
defined in the DT is already describing the CPU parent clock.

Maxime

Changes from v1:
  - Rebased on top of 3.16
  - Reworked a bit the code in the first patch as requested by Rob
    Herring

Maxime Ripard (2):
  ARM: topology: Use a clock if possible to get the CPU frequency
  ARM: sunxi: Add clocks node to the CPU nodes

 arch/arm/boot/dts/sun6i-a31.dtsi |  4 ++++
 arch/arm/boot/dts/sun7i-a20.dtsi |  2 ++
 arch/arm/kernel/topology.c       | 25 ++++++++++++++++++-------
 3 files changed, 24 insertions(+), 7 deletions(-)

-- 
2.0.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux