The NPCM750 Timer/Watchdoc Controller has multiple interrupt lines, connected to multiple timers. The driver uses timer 0 for timer interrupts, so the interrupt line corresponding to timer 0 should be specified in DT. I removed the mention of "flags for falling edge", because the timer controller uses high-level interrupts rather than falling-edge interrupts, and whether flags should be specified is up the interrupt controller's DT binding. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx> --- .../devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt index ea22dfe485bee..97258f1a1505b 100644 --- a/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt +++ b/Documentation/devicetree/bindings/timer/nuvoton,npcm7xx-timer.txt @@ -6,8 +6,7 @@ timer counters. Required properties: - compatible : "nuvoton,npcm750-timer" for Poleg NPCM750. - reg : Offset and length of the register set for the device. -- interrupts : Contain the timer interrupt with flags for - falling edge. +- interrupts : Contain the timer interrupt of timer 0. - clocks : phandle of timer reference clock (usually a 25 MHz clock). Example: -- 2.29.2
