On Thu, Jan 07, 2021 at 12:34:13PM +0200, Alexandru Ardelean wrote: > Changeset adds support for sense resistor. > > Changelog v2 -> v3: > * https://lore.kernel.org/linux-hwmon/20201111091259.46773-1-alexandru.ardelean@xxxxxxxxxx/ > * dropped patch 'docs: hwmon: (ltc2945): change type of val to ULL in ltc2945_val_to_reg()' > * add patch 'hwmon: (ltc2945): clamp values before converting' > * for patch 'hwmon: (ltc2945): add support for sense resistor' > - sense-resistor is represented in milli-ohms internally; this > risks of any other potential overflows with the multiplication to > 1000; the scaling in the driver becomes simpler, but we can't allow > a lower resistor value that 1 mOhm, and all resistor values > need to be integer in mOhm. > - added max power and max amps limits, adjusted to sense resistor > * for patch 'dt-bindings: hwmon: ltc2945: add device tree doc for ltc2945 ' > added 'Reviewed-by: Rob Herring <robh@xxxxxxxxxx>' > > Alexandru Ardelean (4): > hwmon: (ltc2945): wrap regmap into an ltc2945_state struct > hwmon: (ltc2945): clamp values before converting > hwmon: (ltc2945): add support for sense resistor > dt-bindings: hwmon: ltc2945: add device tree doc for ltc2945 > As mentioned in patch 3/3, this series solves a generic problem affecting all hwmon drivers, but it only solves it for one of those drivers. We should work on a generic solution (in-kernel scaling) instead, one that works for all hwmon drivers, not just one. Thanks, Guenter > .../bindings/hwmon/adi,ltc2945.yaml | 49 +++++++ > drivers/hwmon/ltc2945.c | 128 +++++++++++++++--- > 2 files changed, 156 insertions(+), 21 deletions(-) > create mode 100644 Documentation/devicetree/bindings/hwmon/adi,ltc2945.yaml > > -- > 2.17.1 >
