Document LPM pin as optional. Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> --- Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt index d86584ed4d93..451cc4e86b01 100644 --- a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt @@ -4,7 +4,8 @@ Required properties: - compatible: "microchip,mcp16502" - reg: I2C slave address - lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during - suspend-to-ram, keeping the PMIC into HIBERNATE mode. + suspend-to-ram, keeping the PMIC into HIBERNATE mode; this + property is optional; - regulators: A node that houses a sub-node for each regulator within the device. Each sub-node is identified using the node's name. The content of each sub-node is defined by the -- 2.7.4