On 2021-01-06 05:59, Chia-Wei, Wang wrote:
The eSPI interrupt controller acts as a SW IRQ number
decoder to correctly control/dispatch interrupts of
the eSPI peripheral, virtual wire, out-of-band, and
flash channels.
Signed-off-by: Chia-Wei, Wang <chiawei_wang@xxxxxxxxxxxxxx>
---
drivers/irqchip/Makefile | 2 +-
drivers/irqchip/irq-aspeed-espi-ic.c | 251 ++++++++++++++++++++++++
include/soc/aspeed/espi.h | 279 +++++++++++++++++++++++++++
3 files changed, 531 insertions(+), 1 deletion(-)
create mode 100644 drivers/irqchip/irq-aspeed-espi-ic.c
create mode 100644 include/soc/aspeed/espi.h
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 0ac93bfaec61..56da4a3123f8 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -86,7 +86,7 @@ obj-$(CONFIG_MVEBU_PIC) += irq-mvebu-pic.o
obj-$(CONFIG_MVEBU_SEI) += irq-mvebu-sei.o
obj-$(CONFIG_LS_EXTIRQ) += irq-ls-extirq.o
obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
-obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o irq-aspeed-i2c-ic.o
irq-aspeed-scu-ic.o
+obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o irq-aspeed-i2c-ic.o
irq-aspeed-scu-ic.o irq-aspeed-espi-ic.o
obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o
obj-$(CONFIG_QCOM_IRQ_COMBINER) += qcom-irq-combiner.o
obj-$(CONFIG_IRQ_UNIPHIER_AIDET) += irq-uniphier-aidet.o
diff --git a/drivers/irqchip/irq-aspeed-espi-ic.c
b/drivers/irqchip/irq-aspeed-espi-ic.c
new file mode 100644
index 000000000000..8a5cc8fe3f0c
--- /dev/null
+++ b/drivers/irqchip/irq-aspeed-espi-ic.c
@@ -0,0 +1,251 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 Aspeed Technology Inc.
+ */
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <soc/aspeed/espi.h>
+#include <dt-bindings/interrupt-controller/aspeed-espi-ic.h>
+
+#define DEVICE_NAME "aspeed-espi-ic"
+#define IRQCHIP_NAME "eSPI-IC"
+
+#define ESPI_IC_IRQ_NUM 7
+
+struct aspeed_espi_ic {
+ struct regmap *map;
+ int irq;
+ int gpio_irq;
+ struct irq_domain *irq_domain;
+};
+
+static void aspeed_espi_ic_gpio_isr(struct irq_desc *desc)
+{
+ unsigned int irq;
+ struct aspeed_espi_ic *espi_ic = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ chained_irq_enter(chip, desc);
+
+ irq = irq_find_mapping(espi_ic->irq_domain,
+ ASPEED_ESPI_IC_CTRL_RESET);
+ generic_handle_irq(irq);
+
+ irq = irq_find_mapping(espi_ic->irq_domain,
+ ASPEED_ESPI_IC_CHAN_RESET);
+ generic_handle_irq(irq);
So for each mux interrupt, you generate two endpoints interrupt,
without even checking whether they are pending? That's no good.
+
+ chained_irq_exit(chip, desc);
+}
+
+static void aspeed_espi_ic_isr(struct irq_desc *desc)
+{
+ unsigned int sts;
+ unsigned int irq;
+ struct aspeed_espi_ic *espi_ic = irq_desc_get_handler_data(desc);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+
+ chained_irq_enter(chip, desc);
+
+ regmap_read(espi_ic->map, ESPI_INT_STS, &sts);
+
+ if (sts & ESPI_INT_STS_PERIF_BITS) {
+ irq = irq_find_mapping(espi_ic->irq_domain,
+ ASPEED_ESPI_IC_PERIF_EVENT);
+ generic_handle_irq(irq);
+ }
+
+ if (sts & ESPI_INT_STS_VW_BITS) {
+ irq = irq_find_mapping(espi_ic->irq_domain,
+ ASPEED_ESPI_IC_VW_EVENT);
+ generic_handle_irq(irq);
+ }
+
+ if (sts & ESPI_INT_STS_OOB_BITS) {
+ irq = irq_find_mapping(espi_ic->irq_domain,
+ ASPEED_ESPI_IC_OOB_EVENT);
+ generic_handle_irq(irq);
+ }
+
+ if (sts & ESPI_INT_STS_FLASH_BITS) {
+ irq = irq_find_mapping(espi_ic->irq_domain,
+ ASPEED_ESPI_IC_FLASH_EVENT);
+ generic_handle_irq(irq);
+ }
+
+ if (sts & ESPI_INT_STS_HW_RST_DEASSERT) {
+ irq = irq_find_mapping(espi_ic->irq_domain,
+ ASPEED_ESPI_IC_CTRL_EVENT);
+ generic_handle_irq(irq);
+ }
This is horrible. Why can't you just use fls() in a loop?
+
+ chained_irq_exit(chip, desc);
+}
+
+static void aspeed_espi_ic_irq_disable(struct irq_data *data)
+{
+ struct aspeed_espi_ic *espi_ic = irq_data_get_irq_chip_data(data);
+
+ switch (data->hwirq) {
+ case ASPEED_ESPI_IC_CTRL_EVENT:
+ regmap_update_bits(espi_ic->map, ESPI_INT_EN,
+ ESPI_INT_EN_HW_RST_DEASSERT,
+ 0);
+ break;
+ case ASPEED_ESPI_IC_PERIF_EVENT:
+ regmap_update_bits(espi_ic->map, ESPI_INT_EN,
+ ESPI_INT_EN_PERIF_BITS, 0);
+ break;
+ case ASPEED_ESPI_IC_VW_EVENT:
+ regmap_update_bits(espi_ic->map, ESPI_INT_EN,
+ ESPI_INT_EN_VW_BITS, 0);
+ break;
+ case ASPEED_ESPI_IC_OOB_EVENT:
+ regmap_update_bits(espi_ic->map, ESPI_INT_EN,
+ ESPI_INT_EN_OOB_BITS, 0);
+ break;
+ case ASPEED_ESPI_IC_FLASH_EVENT:
+ regmap_update_bits(espi_ic->map, ESPI_INT_EN,
+ ESPI_INT_EN_FLASH_BITS, 0);
+ break;
+ }
Most of these are masking multiple events at once, which makes me
think that it really doesn't belong here...
+}
+
+static void aspeed_espi_ic_irq_enable(struct irq_data *data)
+{
+ struct aspeed_espi_ic *espi_ic = irq_data_get_irq_chip_data(data);
+
+ switch (data->hwirq) {
+ case ASPEED_ESPI_IC_CTRL_EVENT:
+ regmap_update_bits(espi_ic->map, ESPI_INT_EN,
+ ESPI_INT_EN_HW_RST_DEASSERT,
+ ESPI_INT_EN_HW_RST_DEASSERT);
+ break;
+ case ASPEED_ESPI_IC_PERIF_EVENT:
+ regmap_update_bits(espi_ic->map, ESPI_INT_EN,
+ ESPI_INT_EN_PERIF_BITS,
+ ESPI_INT_EN_PERIF_BITS);
+ break;
+ case ASPEED_ESPI_IC_VW_EVENT:
+ regmap_update_bits(espi_ic->map, ESPI_INT_EN,
+ ESPI_INT_EN_VW_BITS,
+ ESPI_INT_EN_VW_BITS);
+ break;
+ case ASPEED_ESPI_IC_OOB_EVENT:
+ regmap_update_bits(espi_ic->map, ESPI_INT_EN,
+ ESPI_INT_EN_OOB_BITS,
+ ESPI_INT_EN_OOB_BITS);
+ break;
+ case ASPEED_ESPI_IC_FLASH_EVENT:
+ regmap_update_bits(espi_ic->map, ESPI_INT_EN,
+ ESPI_INT_EN_FLASH_BITS,
+ ESPI_INT_EN_FLASH_BITS);
+ break;
+ }
+}
+
+static struct irq_chip aspeed_espi_ic_chip = {
+ .name = IRQCHIP_NAME,
+ .irq_enable = aspeed_espi_ic_irq_enable,
+ .irq_disable = aspeed_espi_ic_irq_disable,
+};
+
+static int aspeed_espi_ic_map(struct irq_domain *domain, unsigned int
irq,
+ irq_hw_number_t hwirq)
+{
+ irq_set_chip_and_handler(irq, &aspeed_espi_ic_chip,
handle_simple_irq);
+ irq_set_chip_data(irq, domain->host_data);
+
+ return 0;
+}
+
+static const struct irq_domain_ops aspeed_espi_ic_domain_ops = {
+ .map = aspeed_espi_ic_map,
+};
+
+static int aspeed_espi_ic_probe(struct platform_device *pdev)
+{
+ struct device *dev;
+ struct aspeed_espi_ic *espi_ic;
+
+ dev = &pdev->dev;
+
+ espi_ic = devm_kzalloc(dev, sizeof(*espi_ic), GFP_KERNEL);
+ if (!espi_ic)
+ return -ENOMEM;
+
+ espi_ic->map = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(espi_ic->map)) {
+ dev_err(dev, "cannot get regmap\n");
+ return -ENODEV;
+ }
+
+ espi_ic->irq = platform_get_irq(pdev, 0);
+ if (espi_ic->irq < 0)
+ return espi_ic->irq;
+
+ espi_ic->gpio_irq = platform_get_irq(pdev, 1);
+ if (espi_ic->gpio_irq < 0)
+ return espi_ic->gpio_irq;
+
+ espi_ic->irq_domain = irq_domain_add_linear(dev->of_node,
ESPI_IC_IRQ_NUM,
+ &aspeed_espi_ic_domain_ops,
+ espi_ic);
+ if (!espi_ic->irq_domain) {
+ dev_err(dev, "cannot to add irq domain\n");
+ return -ENOMEM;
+ }
+
+ irq_set_chained_handler_and_data(espi_ic->irq,
+ aspeed_espi_ic_isr,
+ espi_ic);
+
+ irq_set_chained_handler_and_data(espi_ic->gpio_irq,
+ aspeed_espi_ic_gpio_isr,
+ espi_ic);
+
+ dev_set_drvdata(dev, espi_ic);
+
+ dev_info(dev, "eSPI IRQ controller initialized\n");
+
+ return 0;
+}
+
+static int aspeed_espi_ic_remove(struct platform_device *pdev)
+{
+ struct aspeed_espi_ic *espi_ic = platform_get_drvdata(pdev);
+
+ irq_domain_remove(espi_ic->irq_domain);
+ return 0;
+}
+
+static const struct of_device_id aspeed_espi_ic_of_matches[] = {
+ { .compatible = "aspeed,ast2600-espi-ic" },
+ { },
+};
+
+static struct platform_driver aspeed_espi_ic_driver = {
+ .driver = {
+ .name = DEVICE_NAME,
+ .of_match_table = aspeed_espi_ic_of_matches,
+ },
+ .probe = aspeed_espi_ic_probe,
+ .remove = aspeed_espi_ic_remove,
+};
+
+module_platform_driver(aspeed_espi_ic_driver);
+
+MODULE_AUTHOR("Chia-Wei Wang <chiawei_wang@xxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Ryan Chen <ryan_chen@xxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Aspeed eSPI interrupt controller");
+MODULE_LICENSE("GPL v2");
diff --git a/include/soc/aspeed/espi.h b/include/soc/aspeed/espi.h
new file mode 100644
index 000000000000..c9a4f51737ee
--- /dev/null
+++ b/include/soc/aspeed/espi.h
@@ -0,0 +1,279 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020 Aspeed Technology Inc.
+ * Author: Chia-Wei Wang <chiawei_wang@xxxxxxxxxxxxxx>
+ */
+#ifndef _ASPEED_ESPI_H_
+#define _ASPEED_ESPI_H_
[...]
If nothing else uses the data here, move it to the irqchip driver.
M.
--
Jazz is not dead. It just smells funny...
