[PATCH 0/1] ARM: dts: zynq: Prepare Parallella

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello,

This patch adds an initial device tree for the Parallella board.
UART, SD card, Ethernet are enabled.
Not yet enabled are HDMI (FPGA, ADV7513), QSPI and 2x USB.

Where I'm a bit unsure is the PHY placement; placement as subnode of the 
GEM corresponds to what was in the downstream 3.12 based device tree. It 
is a separate chip on the board though, whereas GEM is on the SoC.

Regards,
Andreas

Andreas Färber (1):
  ARM: dts: zynq: Add Parallella device tree

 arch/arm/boot/dts/Makefile            |  4 ++-
 arch/arm/boot/dts/zynq-parallella.dts | 63 +++++++++++++++++++++++++++++++++++
 2 files changed, 66 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/zynq-parallella.dts

-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux