Hi Ricardo,
On Wed, Dec 30, 2020 at 05:01:16PM -0600, Ricardo Rivera-Matos wrote:
> The BQ256XX family of devices are highly integrated buck chargers
> for single cell batteries.
>
> Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@xxxxxx>
>
> v5 - adds power_supply_put_battery_info() and devm_add_action_or_rest() calls
>
> v6 - implements bq256xx_remove function
>
> v7 - applies various fixes
>
> - implements clamp() API
>
> - implements memcmp() API
>
> - changes cache_type to REGACHE_FLAT
>
> - changes bq256xx_probe to properly unregister device
>
> Signed-off-by: Ricardo Rivera-Matos <r-rivera-matos@xxxxxx>
> ---
Thanks, looks mostly good now.
> drivers/power/supply/Kconfig | 11 +
> drivers/power/supply/Makefile | 1 +
> drivers/power/supply/bq256xx_charger.c | 1747 ++++++++++++++++++++++++
> 3 files changed, 1759 insertions(+)
> create mode 100644 drivers/power/supply/bq256xx_charger.c
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index 44d3c8512fb8..87d852914bc2 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -618,6 +618,17 @@ config CHARGER_BQ25890
> help
> Say Y to enable support for the TI BQ25890 battery charger.
>
> +config CHARGER_BQ256XX
> + tristate "TI BQ256XX battery charger driver"
> + depends on I2C
> + depends on GPIOLIB || COMPILE_TEST
> + select REGMAP_I2C
> + help
> + Say Y to enable support for the TI BQ256XX battery chargers. The
> + BQ256XX family of devices are highly-integrated, switch-mode battery
> + charge management and system power path management devices for single
> + cell Li-ion and Li-polymer batteries.
> +
> config CHARGER_SMB347
> tristate "Summit Microelectronics SMB347 Battery Charger"
> depends on I2C
Please rebase to current power-supply for-next branch, Kconfig and
Makefile diff does not apply because of one additional BQ device.
> [...]
> +static void bq256xx_usb_work(struct work_struct *data)
> +{
> + struct bq256xx_device *bq =
> + container_of(data, struct bq256xx_device, usb_work);
> +
> + switch (bq->usb_event) {
> + case USB_EVENT_ID:
> + break;
> +
spurious newline, please remove!
> + case USB_EVENT_NONE:
> + power_supply_changed(bq->charger);
> + break;
> + default:
> + dev_err(bq->dev, "Error switching to charger mode.\n");
> + break;
> + }
> +}
> +
> [...]
> +static int bq256xx_hw_init(struct bq256xx_device *bq)
> +{
> + struct power_supply_battery_info bat_info = { };
> + int wd_reg_val = BQ256XX_WATCHDOG_DIS;
> + int ret = 0;
> + int i;
> +
> + for (i = 0; i < BQ256XX_NUM_WD_VAL; i++) {
> + if (bq->watchdog_timer > bq256xx_watchdog_time[i] &&
> + bq->watchdog_timer < bq256xx_watchdog_time[i + 1])
> + wd_reg_val = i;
> + }
> + ret = regmap_update_bits(bq->regmap, BQ256XX_CHARGER_CONTROL_1,
> + BQ256XX_WATCHDOG_MASK, wd_reg_val <<
> + BQ256XX_WDT_BIT_SHIFT);
> +
> + ret = power_supply_get_battery_info(bq->charger, &bat_info);
> + if (ret) {
> + dev_warn(bq->dev, "battery info missing, default values will be applied\n");
> +
> + bat_info.constant_charge_current_max_ua =
> + bq->chip_info->bq256xx_def_ichg;
> +
> + bat_info.constant_charge_voltage_max_uv =
> + bq->chip_info->bq256xx_def_vbatreg;
> +
> + bat_info.precharge_current_ua =
> + bq->chip_info->bq256xx_def_iprechg;
> +
> + bat_info.charge_term_current_ua =
> + bq->chip_info->bq256xx_def_iterm;
> +
> + bq->init_data.ichg_max =
> + bq->chip_info->bq256xx_max_ichg;
> +
> + bq->init_data.vbatreg_max =
> + bq->chip_info->bq256xx_max_vbatreg;
> + } else {
> + bq->init_data.ichg_max =
> + bat_info.constant_charge_current_max_ua;
> +
> + bq->init_data.vbatreg_max =
> + bat_info.constant_charge_voltage_max_uv;
> + }
> +
> + ret = bq->chip_info->bq256xx_set_vindpm(bq, bq->init_data.vindpm);
> + if (ret)
> + goto err_out;
> +
> + ret = bq->chip_info->bq256xx_set_iindpm(bq, bq->init_data.iindpm);
> + if (ret)
> + goto err_out;
> +
> + ret = bq->chip_info->bq256xx_set_ichg(bq,
> + bat_info.constant_charge_current_max_ua);
> + if (ret)
> + goto err_out;
> +
> + ret = bq->chip_info->bq256xx_set_iprechg(bq,
> + bat_info.precharge_current_ua);
> + if (ret)
> + goto err_out;
> +
> + ret = bq->chip_info->bq256xx_set_vbatreg(bq,
> + bat_info.constant_charge_voltage_max_uv);
> + if (ret)
> + goto err_out;
> +
> + ret = bq->chip_info->bq256xx_set_iterm(bq,
> + bat_info.charge_term_current_ua);
> + if (ret)
> + goto err_out;
> +
> + power_supply_put_battery_info(bq->charger, &bat_info);
> +
> + return 0;
> +
> +err_out:
> + return ret;
please return error code directly instead of adding this useless
goto.
> [...]
-- Sebastian
Attachment:
signature.asc
Description: PGP signature
