On Mon, Dec 21, 2020 at 05:08:44PM +0300, Dmitry Baryshkov wrote: > Hello, > > On Mon, 21 Dec 2020 at 12:02, Lee Jones <lee.jones@xxxxxxxxxx> wrote: > > > > On Sun, 20 Dec 2020, Dmitry Baryshkov wrote: > > > > > Qualcomm QCA639x is a family of WiFi + Bluetooth SoCs, with BT part > > > being controlled through the UART and WiFi being present on PCIe > > > bus. Both blocks share common power sources. So add mfd device driver > > > handling power sequencing of QCA6390/1. > > > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> > > > --- > > > drivers/mfd/Kconfig | 12 +++ > > > drivers/mfd/Makefile | 1 + > > > drivers/mfd/qcom-qca639x.c | 168 +++++++++++++++++++++++++++++++++++++ > > > 3 files changed, 181 insertions(+) > > > create mode 100644 drivers/mfd/qcom-qca639x.c > > > > This is not an MFD, since it utilised neither the MFD API nor > > of_platform_populate() to register child devices. > > It would use them if the WiFi part was not on a discoverable bus. PCI nodes have been supported in DT for forever. If you have non-discoverable additions to a PCI device, then the PCI device should be in DT. Rob
