Re: [PATCH v5 16/27] iommu/mediatek: Add device link for smi-common and m4u

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2020-12-23 at 17:29 +0900, Tomasz Figa wrote:
> On Wed, Dec 09, 2020 at 04:00:51PM +0800, Yong Wu wrote:
> > In the lastest SoC, M4U has its special power domain. thus, If the engine
> > begin to work, it should help enable the power for M4U firstly.
> > Currently if the engine work, it always enable the power/clocks for
> > smi-larbs/smi-common. This patch adds device_link for smi-common and M4U.
> > then, if smi-common power is enabled, the M4U power also is powered on
> > automatically.
> > 
> > Normally M4U connect with several smi-larbs and their smi-common always
> > are the same, In this patch it get smi-common dev from the first smi-larb
> > device(i==0), then add the device_link only while m4u has power-domain.
> > 
> > Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
> > ---
> >  drivers/iommu/mtk_iommu.c | 30 ++++++++++++++++++++++++++++--
> >  drivers/iommu/mtk_iommu.h |  1 +
> >  2 files changed, 29 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> > index 09c8c58feb78..5614015e5b96 100644
> > --- a/drivers/iommu/mtk_iommu.c
> > +++ b/drivers/iommu/mtk_iommu.c
> > @@ -20,6 +20,7 @@
> >  #include <linux/of_irq.h>
> >  #include <linux/of_platform.h>
> >  #include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> >  #include <linux/regmap.h>
> >  #include <linux/slab.h>
> >  #include <linux/spinlock.h>
> > @@ -706,7 +707,7 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> >  		return larb_nr;
> >  
> >  	for (i = 0; i < larb_nr; i++) {
> > -		struct device_node *larbnode;
> > +		struct device_node *larbnode, *smicomm_node;
> >  		struct platform_device *plarbdev;
> >  		u32 id;
> >  
> > @@ -732,6 +733,26 @@ static int mtk_iommu_probe(struct platform_device *pdev)
> >  
> >  		component_match_add_release(dev, &match, release_of,
> >  					    compare_of, larbnode);
> > +		if (i != 0)
> > +			continue;
> 
> How about using the last larb instead and moving the code below outside
> of the loop?

Of course OK. Thanks.





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux