Add support for DMA Scatter-Gather (SG) constraint so that DMA clients can
handle the AxiDMA limitation.
Without supporting DMA constraint the default Max segment size reported by
dmaengine is 64KB, which is not supported by Intel KeemBay AxiDMA.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Signed-off-by: Sia Jee Heng <jee.heng.sia@xxxxxxxxx>
---
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 8 ++++++++
drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 1 +
2 files changed, 9 insertions(+)
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index ab145a84b0c0..58845b058d9d 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -12,6 +12,7 @@
#include <linux/device.h>
#include <linux/dmaengine.h>
#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -1350,6 +1351,13 @@ static int dw_probe(struct platform_device *pdev)
dw->dma.device_prep_slave_sg = dw_axi_dma_chan_prep_slave_sg;
dw->dma.device_prep_dma_cyclic = dw_axi_dma_chan_prep_cyclic;
+ /*
+ * Synopsis DesignWare AxiDMA datasheet mentioned Maximum
+ * supported blocks is 1024. Device register width is 4 bytes.
+ * Therefore, set constraint to 1024 * 4.
+ */
+ dw->dma.dev->dma_parms = &dw->dma_parms;
+ dma_set_max_seg_size(&pdev->dev, MAX_BLOCK_SIZE);
platform_set_drvdata(pdev, chip);
pm_runtime_enable(chip->dev);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index 3a357f7fda02..1e937ea2a96d 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -54,6 +54,7 @@ struct axi_dma_chan {
struct dw_axi_dma {
struct dma_device dma;
struct dw_axi_dma_hcfg *hdata;
+ struct device_dma_parameters dma_parms;
/* channels */
struct axi_dma_chan *chan;
--
2.18.0
