These patches are needed to enable I2C on the Falcon board for the V3U. Patch #5 is only for demonstration purposes. The series depends on my RWDT series, Ulrich's PFC v2 series and Geert's DMA placeholder. A branch can be found here: git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git renesas/v3u/i2c There is also a series in-flight to handle spurious interrupts on the V3U. Because I have never seen one, I wouldn't call it a dependency, so the series is handled seperately. Looking forward to comments... Koji Matsuoka (2): arm64: dts: renesas: Add I2C to R8A779A0 arm64: dts: renesas: Add I2C support for falcon board Wolfram Sang (3): dt-bindings: i2c: renesas,i2c: add r8a779a0 (V3U) support clk: renesas: r8a779a0: add clocks for I2C v3u: enable other I2C busses for testing .../devicetree/bindings/i2c/renesas,i2c.txt | 1 + .../boot/dts/renesas/r8a779a0-falcon.dts | 93 +++++++++++++ arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 122 ++++++++++++++++++ drivers/clk/renesas/r8a779a0-cpg-mssr.c | 7 + 4 files changed, 223 insertions(+) -- 2.28.0
