*-supply properties are always a single phandle, so binding schemas
don't need a type $ref nor 'maxItems'.
A meta-schema check for this is pending once these existing cases are
fixed.
Cc: Jonathan Cameron <jic23@xxxxxxxxxx>
Cc: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
Cc: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
Cc: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxx>
Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Cc: Maxime Ripard <mripard@xxxxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: linux-iio@xxxxxxxxxxxxxxx
Cc: linux-input@xxxxxxxxxxxxxxx
Cc: linux-media@xxxxxxxxxxxxxxx
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
Documentation/devicetree/bindings/display/bridge/anx6345.yaml | 2 --
.../devicetree/bindings/display/bridge/ite,it6505.yaml | 2 --
.../devicetree/bindings/display/bridge/lvds-codec.yaml | 3 +--
Documentation/devicetree/bindings/display/bridge/ps8640.yaml | 2 --
.../devicetree/bindings/display/bridge/simple-bridge.yaml | 1 -
.../bindings/display/bridge/thine,thc63lvd1024.yaml | 1 -
.../devicetree/bindings/display/bridge/toshiba,tc358775.yaml | 2 --
Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml | 4 +---
.../devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 3 +--
.../devicetree/bindings/input/fsl,mpr121-touchkey.yaml | 3 +--
.../devicetree/bindings/input/touchscreen/edt-ft5x06.yaml | 3 +--
.../devicetree/bindings/media/i2c/maxim,max9286.yaml | 1 -
Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml | 3 ---
Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml | 3 ---
Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml | 3 ---
Documentation/devicetree/bindings/mfd/st,stmfx.yaml | 3 +--
.../devicetree/bindings/regulator/anatop-regulator.yaml | 1 -
17 files changed, 6 insertions(+), 34 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
index 8c0e4f285fbc..fccd63521a8c 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -26,11 +26,9 @@ properties:
description: GPIO connected to active low reset
dvdd12-supply:
- maxItems: 1
description: Regulator for 1.2V digital core power.
dvdd25-supply:
- maxItems: 1
description: Regulator for 2.5V digital core power.
ports:
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
index efbb3d0117dc..02cfc0a3b550 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
@@ -35,11 +35,9 @@ properties:
maxItems: 1
ovdd-supply:
- maxItems: 1
description: I/O voltage
pwr18-supply:
- maxItems: 1
description: core voltage
interrupts:
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index e5e3c72630cf..66a14d60ce1d 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -79,8 +79,7 @@ properties:
The GPIO used to control the power down line of this device.
maxItems: 1
- power-supply:
- maxItems: 1
+ power-supply: true
required:
- compatible
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
index 7e27cfcf770d..763c7909473e 100644
--- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
@@ -35,11 +35,9 @@ properties:
description: GPIO connected to active low reset.
vdd12-supply:
- maxItems: 1
description: Regulator for 1.2V digital core power.
vdd33-supply:
- maxItems: 1
description: Regulator for 3.3V digital core power.
ports:
diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
index 3ddb35fcf0a2..64e8a1c24b40 100644
--- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
@@ -60,7 +60,6 @@ properties:
description: GPIO controlling bridge enable
vdd-supply:
- maxItems: 1
description: Power supply for the bridge
required:
diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
index 469ac4a34273..3d5ce08a5792 100644
--- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
@@ -74,7 +74,6 @@ properties:
description: Power down GPIO signal, pin name "/PDWN", active low.
vcc-supply:
- maxItems: 1
description:
Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and
digital circuitry.
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
index fd3113aa9ccd..b5959cc78b8d 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -28,11 +28,9 @@ properties:
description: i2c address of the bridge, 0x0f
vdd-supply:
- maxItems: 1
description: 1.2V LVDS Power Supply
vddio-supply:
- maxItems: 1
description: 1.8V IO Power Supply
stby-gpios:
diff --git a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
index 6a991e9f78e2..f04084fae5e8 100644
--- a/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/lltc,ltc2496.yaml
@@ -16,9 +16,7 @@ properties:
enum:
- lltc,ltc2496
- vref-supply:
- description: phandle to an external regulator providing the reference voltage
- $ref: /schemas/types.yaml#/definitions/phandle
+ vref-supply: true
reg:
description: spi chipselect number according to the usual spi bindings
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
index 7037f82ec753..88384b69f917 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -22,8 +22,7 @@ properties:
- ti,hdc2010
- ti,hdc2080
- vdd-supply:
- maxItems: 1
+ vdd-supply: true
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
index 378a85c09d34..878464f128dc 100644
--- a/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
+++ b/Documentation/devicetree/bindings/input/fsl,mpr121-touchkey.yaml
@@ -31,8 +31,7 @@ properties:
interrupts:
maxItems: 1
- vdd-supply:
- maxItems: 1
+ vdd-supply: true
linux,keycodes:
minItems: 1
diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
index 4ce109476a0e..bfc3a8b5e118 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
+++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml
@@ -55,8 +55,7 @@ properties:
wakeup-source: true
- vcc-supply:
- maxItems: 1
+ vcc-supply: true
gain:
description: Allows setting the sensitivity in the range from 0 to 31.
diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
index 9ea827092fdd..68ee8c7d9e79 100644
--- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
@@ -40,7 +40,6 @@ properties:
poc-supply:
description: Regulator providing Power over Coax to the cameras
- maxItems: 1
enable-gpios:
description: GPIO connected to the \#PWDN pin with inverted polarity
diff --git a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
index 0df0334d2d0d..bb3528315f20 100644
--- a/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/mipi-ccs.yaml
@@ -39,15 +39,12 @@ properties:
vana-supply:
description: Analogue voltage supply (VANA), sensor dependent.
- maxItems: 1
vcore-supply:
description: Core voltage supply (VCore), sensor dependent.
- maxItems: 1
vio-supply:
description: I/O voltage supply (VIO), sensor dependent.
- maxItems: 1
clocks:
description: External clock to the sensor.
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
index 1a3590dd0e98..eb12526a462f 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx214.yaml
@@ -37,15 +37,12 @@ properties:
vdddo-supply:
description: Chip digital IO regulator (1.8V).
- maxItems: 1
vdda-supply:
description: Chip analog regulator (2.7V).
- maxItems: 1
vddd-supply:
description: Chip digital core regulator (1.12V).
- maxItems: 1
flash-leds:
description: See ../video-interfaces.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
index f697e1a20beb..a66acb20d59b 100644
--- a/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx274.yaml
@@ -33,15 +33,12 @@ properties:
vana-supply:
description: Sensor 2.8 V analog supply.
- maxItems: 1
vdig-supply:
description: Sensor 1.8 V digital core supply.
- maxItems: 1
vddl-supply:
description: Sensor digital IO 1.2 V supply.
- maxItems: 1
port:
type: object
diff --git a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
index 888ab4b5df45..19e9afb385ac 100644
--- a/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stmfx.yaml
@@ -26,8 +26,7 @@ properties:
drive-open-drain: true
- vdd-supply:
- maxItems: 1
+ vdd-supply: true
pinctrl:
type: object
diff --git a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
index e7b3abe30363..0a66338c7e5a 100644
--- a/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/anatop-regulator.yaml
@@ -59,7 +59,6 @@ properties:
description: u32 value representing regulator enable bit offset.
vin-supply:
- $ref: '/schemas/types.yaml#/definitions/phandle'
description: input supply phandle.
required:
--
2.27.0
