On Mon, Dec 21, 2020 at 08:09:47PM +0530, Jagan Teki wrote: > On Mon, Dec 21, 2020 at 7:35 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote: > > > > On Mon, Dec 21, 2020 at 07:29:22PM +0530, Jagan Teki wrote: > > > On Mon, Dec 21, 2020 at 7:16 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote: > > > > > > > > On Mon, Dec 21, 2020 at 05:01:47PM +0530, Jagan Teki wrote: > > > > > i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. > > > > > > > > > > C.TOUCH 2.0 is a general purpose carrier board with capacitive > > > > > touch interface support. > > > > > > > > > > i.Core MX8M Mini needs to mount on top of this Carrier board for > > > > > creating complete i.Core MX8M Mini C.TOUCH 2.0 board. > > > > > > > > > > Add bindings for it. > > > > > > > > > > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> > > > > > --- > > > > > Changes for v2: > > > > > - updated commit message > > > > > > > > > > Documentation/devicetree/bindings/arm/fsl.yaml | 2 ++ > > > > > 1 file changed, 2 insertions(+) > > > > > > > > > > diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml > > > > > index 67980dcef66d..e653e0a43016 100644 > > > > > --- a/Documentation/devicetree/bindings/arm/fsl.yaml > > > > > +++ b/Documentation/devicetree/bindings/arm/fsl.yaml > > > > > @@ -667,6 +667,8 @@ properties: > > > > > items: > > > > > - enum: > > > > > - beacon,imx8mm-beacon-kit # i.MX8MM Beacon Development Kit > > > > > + - engicam,icore-mx8mm # i.MX8MM Engicam i.Core MX8M Mini SOM > > > > > + - engicam,icore-mx8mm-ctouch2 # i.MX8MM Engicam i.Core MX8M Mini C.TOUCH 2.0 > > > > > > > > Please test your DTS against new schema with dtbs_check. This won't > > > > match. > > > > > > Sorry, not sure I understand clearly here. > > > > > > This the dts file ie used matched compatible. > > > compatible = "engicam,icore-mx8mm-ctouch2", "engicam,icore-mx8mm", > > > "fsl,imx8mm"; > > > > > > I did build the dtbs_check without showing any issues like, > > > > > > $ make ARCH=arm64 dtbs_check > > > ... > > > > > > From schema: /w/dt-schema/dt-schema/dtschema/schemas/property-units.yaml > > > DTC arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dtb > > > DTC arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2-of10.dtb > > > DTC arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-edimm2.2.dtb > > > .. > > > > > > Can you let me know what I missed here? > > > > You pasted here output of validating with property-units.yaml (or > > something else), not the schema which you changed. If you want to limit > > the tests, use DT_SCHEMA_FILES. > > > > I mentioned about exactly the same problem in yout previous v1 > > at patch #5. No changes here stil. > > Yes, I usually did that check before posting. Please check the build > log below and fsl.yaml binding is fine to build. > > # make dt_binding_check DT_SCHEMA_FILES=arm/fsl.yaml 1. Wrong path to schema file, 2. Bindings pass, they are not a problem. You were running dtbs_check, right? Best regards, Krzysztof
