On Mon, Dec 21, 2020 at 05:01:49PM +0530, Jagan Teki wrote: > Engicam C.TOUCH 2.0 is an EDIMM compliant general purpose Carrier > board. > > Genaral features: > - Ethernet 10/100 > - Wifi/BT > - USB Type A/OTG > - Audio Out > - CAN > - LVDS panel connector > > i.Core MX8M Mini is an EDIMM SoM based on NXP i.MX8M Mini from Engicam. > > i.Core MX8M Mini needs to mount on top of this Carrier board for > creating complete i.Core MX8M Mini C.TOUCH 2.0 board. > > Add support for it. > > Signed-off-by: Matteo Lisi <matteo.lisi@xxxxxxxxxxx> > Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> > --- > Changes for v2: > - enabled fec1 node > - updated commit message > - dropped engicam from filename since it aligned with imx6 engicam > dts files naming conventions. > - add i2c nodes > - fixed v1 comments > > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../dts/freescale/imx8mm-engicam-common.dtsi | 82 +++++++++++++++++++ > .../dts/freescale/imx8mm-engicam-ctouch2.dtsi | 7 ++ > .../freescale/imx8mm-icore-mx8mm-ctouch2.dts | 21 +++++ > 4 files changed, 111 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-common.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm-ctouch2.dts > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index 6f0777ee6cd6..8d49a2c74604 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -32,6 +32,7 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-engicam-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-engicam-common.dtsi > new file mode 100644 > index 000000000000..f7870efd9dab > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-engicam-common.dtsi > @@ -0,0 +1,82 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020 Engicam srl > + * Copyright (c) 2020 Amarula Solutions(India) > + */ > + > +&fec1 { > + status = "okay"; > +}; > + > +&i2c2 { > + clock-frequency = <400000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > +}; > + > +&i2c4 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c4>; > + status = "okay"; > +}; > + > +&iomuxc { > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL 0x400001c3 > + MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_i2c4: i2c4grp { > + fsl,pins = < > + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 > + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140 > + MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140 > + >; > + }; > + > + pinctrl_usdhc1_gpio: usdhc1gpiogrp { > + fsl,pins = < > + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x41 > + >; > + }; > + > + pinctrl_usdhc1: usdhc1grp { > + fsl,pins = < > + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 > + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 > + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 > + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 > + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 > + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 > + >; > + }; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > +}; > + > +/* SD */ > +&usdhc1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>; > + cd-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; > + max-frequency = <50000000>; > + bus-width = <4>; > + no-1-8-v; > + pm-ignore-notify; > + keep-power-in-suspend; > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi > new file mode 100644 > index 000000000000..294df07289a2 > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mm-engicam-ctouch2.dtsi > @@ -0,0 +1,7 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020 Engicam srl > + * Copyright (c) 2020 Amarula Solutions(India) > + */ > + > +#include "imx8mm-engicam-common.dtsi" The same as before - a DTSI file to include a DTSI. Remove it. Best regards, Krzysztof