On Thu 17 Dec 07:12 PST 2020, Robert Foss wrote:
> Switch reset pin of ov8856 node from GPIO_ACTIVE_HIGH to GPIO_ACTIVE_LOW,
> this issue prevented the ov8856 from probing properly as it does not respond
> to I2C messages.
>
> Fixes: d4919a44564b ("arm64: dts: qcom: sdm845-db845c: Add ov8856 & ov7251
> camera nodes")
>
> Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index 7cc236575ee2..a943b3f353ce 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -1112,11 +1112,11 @@ camera@10 {
> reg = <0x10>;
>
> // CAM0_RST_N
> - reset-gpios = <&tlmm 9 0>;
> + reset-gpios = <&tlmm 9 1>;
Please do use GPIO_ACTIVE_LOW as the argument...
Regards,
Bjorn
> pinctrl-names = "default";
> pinctrl-0 = <&cam0_default>;
> gpios = <&tlmm 13 0>,
> - <&tlmm 9 0>;
> + <&tlmm 9 1>;
>
> clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
> clock-names = "xvclk";
> --
> 2.27.0
>
