Hello Andres, Thanks a lot for your feedback. On 06/27/2014 09:52 AM, Andreas Färber wrote: > Am 26.06.2014 20:15, schrieb Javier Martinez Canillas: >> Add Device Tree binding documentation for the clocks >> outputs in the Maxim 77802 Power Management IC. >> >> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx> >> --- >> >> Changes since v4: None >> >> Changes since v3: >> - Don't use the same clock driver name in clock-names since it's a consumer >> concept and most probably will be different. Suggested by Doug Anderson. >> >> Changes since v2: >> - Split the DT binding documentation in a separate patch. >> >> .../devicetree/bindings/clock/maxim,max77802.txt | 42 ++++++++++++++++++++++ >> 1 file changed, 42 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/clock/maxim,max77802.txt >> >> diff --git a/Documentation/devicetree/bindings/clock/maxim,max77802.txt b/Documentation/devicetree/bindings/clock/maxim,max77802.txt >> new file mode 100644 >> index 0000000..26bc4f7 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/clock/maxim,max77802.txt >> @@ -0,0 +1,42 @@ >> +Binding for Maxim MAX77802 32k clock generator block >> + >> +This is a part of device tree bindings of MAX77802 multi-function device. >> +More information can be found in bindings/mfd/max77802.txt file. >> + >> +The MAX77802 contains two 32.768khz clock outputs that can be controlled >> +(gated/ungated) over I2C. >> + >> +Following properties should be presend in main device node of the MFD chip. > > "present" > Right, it's a typo. I'll wait for further feedback and will fix both issues you pointed out in the next version of the series. > Regards, > Andreas > Best regards, Javier -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
