Re: [PATCH 2/2] usb: chipidea: Add support for zynq usb host and device controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Jun 27, 2014 at 09:10:09AM +0530, Punnaiah Choudary Kalluri wrote:
> Zynq soc usb controller is a synopsys IP and it is compatible
> with the chipidea spec. So, reusing chipidea drivers for zynq usb
> controller.

What means "... usb controller is a synopsys IP", or it should be "uses
synopsys IP"?
> 
> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xxxxxxxxxx>
> ---
>  drivers/usb/chipidea/Makefile       |    1 +
>  drivers/usb/chipidea/ci_hdrc_zynq.c |  115 +++++++++++++++++++++++++++++++++++
>  2 files changed, 116 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/usb/chipidea/ci_hdrc_zynq.c
> 
> diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile
> index 2f099c7..b0d6b6f 100644
> --- a/drivers/usb/chipidea/Makefile
> +++ b/drivers/usb/chipidea/Makefile
> @@ -12,6 +12,7 @@ ci_hdrc-$(CONFIG_USB_OTG_FSM)		+= otg_fsm.o
>  
>  obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_msm.o
>  obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_zevio.o
> +obj-$(CONFIG_USB_CHIPIDEA)	+= ci_hdrc_zynq.o
>  
>  # PCI doesn't provide stubs, need to check
>  ifneq ($(CONFIG_PCI),)
> diff --git a/drivers/usb/chipidea/ci_hdrc_zynq.c b/drivers/usb/chipidea/ci_hdrc_zynq.c
> new file mode 100644
> index 0000000..b3667da
> --- /dev/null
> +++ b/drivers/usb/chipidea/ci_hdrc_zynq.c
> @@ -0,0 +1,115 @@
> +/*
> + * Copyright (C) 2014 Xilinx, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify it under
> + * the terms of the GNU General Public License version 2 as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/usb/chipidea.h>
> +
> +#include "ci.h"
> +
> +#define ZYNQ_USB_DMA_MASK	0xFFFFFFF0
> +
> +struct ci_hdrc_zynq_data {
> +	struct platform_device *ci_pdev;
> +	struct clk *clk;
> +};
> +
> +static struct ci_hdrc_platform_data pdata = {
> +	.name           = "ci_hdrc_zynq",
> +	.capoffset      = DEF_CAPOFFSET,
> +	.flags          = CI_HDRC_REQUIRE_TRANSCEIVER
> +};
> +
> +static int ci_hdrc_zynq_probe(struct platform_device *pdev)
> +{
> +	struct ci_hdrc_zynq_data *data;
> +	int ret;
> +
> +	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
> +	if (!data) {
> +		dev_err(&pdev->dev, "Failed to allocate ci_hdrc-imx data!\n");

hmm, you forget to delete "xxx-imx".

> +		return -ENOMEM;
> +	}
> +
> +	data->clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(data->clk)) {
> +		dev_err(&pdev->dev,
> +			"Failed to get clock, err=%ld\n", PTR_ERR(data->clk));
> +		return PTR_ERR(data->clk);
> +	}
> +
> +	ret = clk_prepare_enable(data->clk);
> +	if (ret) {
> +		dev_err(&pdev->dev,
> +			"Failed to prepare or enable clock, err=%d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = dma_coerce_mask_and_coherent(&pdev->dev, ZYNQ_USB_DMA_MASK);
> +	if (ret)
> +		goto err_clk;
> +
> +	data->ci_pdev = ci_hdrc_add_device(&pdev->dev,
> +				pdev->resource, pdev->num_resources,
> +				&pdata);
> +	if (IS_ERR(data->ci_pdev)) {
> +		ret = PTR_ERR(data->ci_pdev);
> +		dev_err(&pdev->dev,
> +			"Can't register ci_hdrc platform device, err=%d\n",
> +			ret);
> +		goto err_clk;
> +	}
> +
> +	platform_set_drvdata(pdev, data);
> +
> +	pm_runtime_no_callbacks(&pdev->dev);
> +	pm_runtime_enable(&pdev->dev);
> +	return 0;
> +
> +err_clk:
> +	clk_disable_unprepare(data->clk);
> +	return ret;
> +}
> +
> +static int ci_hdrc_zynq_remove(struct platform_device *pdev)
> +{
> +	struct ci_hdrc_zynq_data *data = platform_get_drvdata(pdev);
> +
> +	pm_runtime_disable(&pdev->dev);
> +	ci_hdrc_remove_device(data->ci_pdev);
> +	clk_disable_unprepare(data->clk);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id ci_hdrc_zynq_dt_ids[] = {
> +	{ .compatible = "xlnx,zynq-usb-2.20a" },
> +	{},
> +};
> +
> +static struct platform_driver ci_hdrc_zynq_driver = {
> +	.probe = ci_hdrc_zynq_probe,
> +	.remove = ci_hdrc_zynq_remove,
> +	.driver = {
> +		.name = "zynq_usb",
> +		.owner = THIS_MODULE,
> +		.of_match_table = ci_hdrc_zynq_dt_ids,
> +	 },
> +};
> +
> +module_platform_driver(ci_hdrc_zynq_driver);
> +
> +MODULE_ALIAS("platform:zynq_usb");
> +MODULE_DESCRIPTION("CI HDRC ZYNQ USB binding");
> +MODULE_AUTHOR("Xilinx Inc");
> +MODULE_LICENSE("GPL v2");
> -- 
> 1.7.4
> 
> 

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux