[PATCH] arm64: dts: qcom: qrb5165-rb5: fix uSD pins drive strength

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Lower drive strength for microSD data and CMD pins from 16 to 10. This
fixes spurious card removal issues observed on some boards. Also this
change allows us to re-enable 1.8V support, which seems to work with
lowered drive strength.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Cc: Veerabhadrarao Badiganti <vbadigan@xxxxxxxxxxxxxx>
Fixes: 53a8ccf1c7e5 ("arm64: dts: qcom: rb5: Add support for uSD card")
---
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index f3da4b0a63bc..3cb3914b8305 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1081,8 +1081,6 @@ &sdhc_2 {
 	vqmmc-supply = <&vreg_l6c_2p96>;
 	cd-gpios = <&tlmm 77 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
-	/* there seem to be issues with HS400-1.8V mode, so disable it */
-	no-1-8-v;
 	no-sdio;
 	no-emmc;
 };
@@ -1382,13 +1380,13 @@ clk {
 		cmd {
 			pins = "sdc2_cmd";
 			bias-pull-up;
-			drive-strength = <16>;
+			drive-strength = <10>;
 		};
 
 		data {
 			pins = "sdc2_data";
 			bias-pull-up;
-			drive-strength = <16>;
+			drive-strength = <10>;
 		};
 	};
 
-- 
2.29.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux