[PATCH v2 35/48] drm/tegra: dc: Support OPP and SoC core voltage scaling

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add OPP and SoC core voltage scaling support to the display controller
driver. This is required for enabling system-wide DVFS on pre-Tegra186
SoCs.

Tested-by: Peter Geis <pgwipeout@xxxxxxxxx>
Tested-by: Nicolas Chauvet <kwizart@xxxxxxxxx>
Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>
---
 drivers/gpu/drm/tegra/dc.c | 66 +++++++++++++++++++++++++++++++++++++-
 1 file changed, 65 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/tegra/dc.c b/drivers/gpu/drm/tegra/dc.c
index b6676f1fe358..105ad786e432 100644
--- a/drivers/gpu/drm/tegra/dc.c
+++ b/drivers/gpu/drm/tegra/dc.c
@@ -11,9 +11,12 @@
 #include <linux/interconnect.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
 #include <linux/pm_runtime.h>
 #include <linux/reset.h>
 
+#include <soc/tegra/common.h>
 #include <soc/tegra/pmc.h>
 
 #include <drm/drm_atomic.h>
@@ -1699,6 +1702,48 @@ int tegra_dc_state_setup_clock(struct tegra_dc *dc,
 	return 0;
 }
 
+static void tegra_dc_update_voltage_state(struct tegra_dc *dc,
+					  struct tegra_dc_state *state)
+{
+	unsigned long rate, pstate;
+	struct dev_pm_opp *opp;
+	int err;
+
+	/* calculate actual pixel clock rate which depends on internal divider */
+	rate = DIV_ROUND_UP(clk_get_rate(dc->clk) * 2, state->div + 2);
+
+	/* find suitable OPP for the rate */
+	opp = dev_pm_opp_find_freq_ceil(dc->dev, &rate);
+
+	if (opp == ERR_PTR(-ERANGE))
+		opp = dev_pm_opp_find_freq_floor(dc->dev, &rate);
+
+	/* -ENOENT means that this device-tree doesn't have OPP table */
+	if (opp == ERR_PTR(-ENOENT))
+		return;
+
+	if (IS_ERR(opp)) {
+		dev_err(dc->dev, "failed to find OPP for %luHz: %pe\n",
+			rate, opp);
+		return;
+	}
+
+	pstate = dev_pm_opp_get_voltage(opp);
+	dev_pm_opp_put(opp);
+
+	/*
+	 * The minimum core voltage depends on the pixel clock rate (which
+	 * depends on internal clock divider of the CRTC) and not on the
+	 * rate of the display controller clock. This is why we're not using
+	 * dev_pm_opp_set_rate() API and instead controlling the power domain
+	 * directly.
+	 */
+	err = dev_pm_genpd_set_performance_state(dc->dev, pstate);
+	if (err)
+		dev_err(dc->dev, "failed to set power domain state to %lu: %d\n",
+			pstate, err);
+}
+
 static void tegra_dc_commit_state(struct tegra_dc *dc,
 				  struct tegra_dc_state *state)
 {
@@ -1738,6 +1783,8 @@ static void tegra_dc_commit_state(struct tegra_dc *dc,
 	if (err < 0)
 		dev_err(dc->dev, "failed to set clock %pC to %lu Hz: %d\n",
 			dc->clk, state->pclk, err);
+
+	tegra_dc_update_voltage_state(dc, state);
 }
 
 static void tegra_dc_stop(struct tegra_dc *dc)
@@ -1931,6 +1978,8 @@ static void tegra_crtc_atomic_disable(struct drm_crtc *crtc,
 	err = host1x_client_suspend(&dc->client);
 	if (err < 0)
 		dev_err(dc->dev, "failed to suspend: %d\n", err);
+
+	dev_pm_genpd_set_performance_state(dc->dev, 0);
 }
 
 static void tegra_crtc_atomic_enable(struct drm_crtc *crtc,
@@ -2523,7 +2572,6 @@ static int tegra_dc_runtime_suspend(struct host1x_client *client)
 
 	clk_disable_unprepare(dc->clk);
 	pm_runtime_put_sync(dev);
-
 	return 0;
 }
 
@@ -2881,6 +2929,18 @@ static int tegra_dc_couple(struct tegra_dc *dc)
 	return 0;
 }
 
+static int tegra_dc_init_opp_table(struct tegra_dc *dc)
+{
+	struct tegra_core_opp_params opp_params = {};
+	int err;
+
+	err = devm_tegra_core_dev_init_opp_table(dc->dev, &opp_params);
+	if (err && err != -ENODEV)
+		return err;
+
+	return 0;
+}
+
 static int tegra_dc_probe(struct platform_device *pdev)
 {
 	struct tegra_dc *dc;
@@ -2939,6 +2999,10 @@ static int tegra_dc_probe(struct platform_device *pdev)
 		tegra_powergate_power_off(dc->powergate);
 	}
 
+	err = tegra_dc_init_opp_table(dc);
+	if (err < 0)
+		return err;
+
 	dc->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(dc->regs))
 		return PTR_ERR(dc->regs);
-- 
2.29.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux