From: Rafał Miłecki <rafal@xxxxxxxxxx>
It's (nearly?) identical PHY as in the STB line and has to be
initialized the same way.
Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
.../dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 4 ++++
arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 13 +++++++++++++
2 files changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index ee3ed612274c..e2bb0b04b524 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -26,6 +26,10 @@ wps {
};
};
+&usb_phy {
+ brcm,ioc = <1>;
+};
+
&nandcs {
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index b5b772a9a51b..a96ec9b85d1f 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -110,10 +110,21 @@ soc {
#size-cells = <1>;
ranges = <0x00 0x00 0x80000000 0x10000>;
+ usb_phy: usb-phy@c200 {
+ compatible = "brcm,brcmstb-usb-phy";
+ reg = <0xc200 0x100>;
+ reg-names = "crtl";
+ dr_mode = "host";
+ brcm,has-xhci;
+ brcm,has-eohci;
+ #phy-cells = <1>;
+ };
+
usb@c300 {
compatible = "generic-ehci";
reg = <0xc300 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB2>;
status = "disabled";
};
@@ -121,6 +132,7 @@ usb@c400 {
compatible = "generic-ohci";
reg = <0xc400 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB2>;
status = "disabled";
};
@@ -128,6 +140,7 @@ usb@d000 {
compatible = "generic-xhci";
reg = <0xd000 0x8c8>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB3>;
status = "disabled";
};
};
--
2.26.2
