[PATCH 0/4] Allwinner H6 RSB support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Allwinner H6 SoC contains an RSB controller. It is almost completely
undocumented, so it was missed when doing the initial SoC bringup.

This series adds the clock/reset, pin configuration, and device tree
node needed to use the RSB controller. Since RSB is faster, simpler, and
generally more reliable than the I2C controller IP in the SoC, switch to
using it where possible.

This was tested on an Orange Pi 3 and a Pine H64 model B. This series
does not switch the Pine H64 to use RSB, as doing so would prevent
accessing the external RTC that shares the I2C bus.

Samuel Holland (4):
  clk: sunxi-ng: h6-r: Add R_APB2_RSB clock and reset
  pinctrl: sunxi: h6-r: Add s_rsb pin functions
  arm64: dts: allwinner: h6: Add RSB controller node
  arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection

 .../dts/allwinner/sun50i-h6-beelink-gs1.dts   | 38 +++++++++----------
 .../dts/allwinner/sun50i-h6-orangepi-3.dts    | 14 +++----
 .../dts/allwinner/sun50i-h6-orangepi.dtsi     | 22 +++++------
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi  | 19 ++++++++++
 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c        |  5 +++
 drivers/clk/sunxi-ng/ccu-sun50i-h6-r.h        |  2 +-
 drivers/pinctrl/sunxi/pinctrl-sun50i-h6-r.c   |  2 +
 include/dt-bindings/clock/sun50i-h6-r-ccu.h   |  1 +
 include/dt-bindings/reset/sun50i-h6-r-ccu.h   |  1 +
 9 files changed, 66 insertions(+), 38 deletions(-)

-- 
2.26.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux