According to the binding documentation pinctrl related nodes must use '-pins$' and ''^(.*-)?pinmux$'' as names. Change all of them to properly match them. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx> --- drivers/staging/mt7621-dts/mt7621.dtsi | 46 +++++++++++++------------- 1 file changed, 23 insertions(+), 23 deletions(-) diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi index 5b9d3bf82cb1..f05b7dec703b 100644 --- a/drivers/staging/mt7621-dts/mt7621.dtsi +++ b/drivers/staging/mt7621-dts/mt7621.dtsi @@ -228,83 +228,83 @@ pinctrl: pinctrl { state_default: pinctrl0 { }; - i2c_pins: i2c0 { - i2c0 { + i2c_pins: i2c0-pins { + pinmux { groups = "i2c"; function = "i2c"; }; }; - spi_pins: spi0 { - spi0 { + spi_pins: spi0-pins { + pinmux { groups = "spi"; function = "spi"; }; }; - uart1_pins: uart1 { - uart1 { + uart1_pins: uart1-pins { + pinmux { groups = "uart1"; function = "uart1"; }; }; - uart2_pins: uart2 { - uart2 { + uart2_pins: uart2-pins { + pinmux { groups = "uart2"; function = "uart2"; }; }; - uart3_pins: uart3 { - uart3 { + uart3_pins: uart3-pins { + pinmux { groups = "uart3"; function = "uart3"; }; }; - rgmii1_pins: rgmii1 { - rgmii1 { + rgmii1_pins: rgmii1-pins { + pinmux { groups = "rgmii1"; function = "rgmii1"; }; }; - rgmii2_pins: rgmii2 { - rgmii2 { + rgmii2_pins: rgmii2-pins { + pinmux { groups = "rgmii2"; function = "rgmii2"; }; }; - mdio_pins: mdio0 { - mdio0 { + mdio_pins: mdio0-pins { + pinmux { groups = "mdio"; function = "mdio"; }; }; - pcie_pins: pcie0 { - pcie0 { + pcie_pins: pcie0-pins { + pinmux { groups = "pcie"; function = "gpio"; }; }; - nand_pins: nand0 { - spi-nand { + nand_pins: nand0-pins { + spi-pinmux { groups = "spi"; function = "nand1"; }; - sdhci-nand { + sdhci-pinmux { groups = "sdhci"; function = "nand2"; }; }; - sdhci_pins: sdhci0 { - sdhci0 { + sdhci_pins: sdhci0-pins { + pinmux { groups = "sdhci"; function = "sdhci"; }; -- 2.25.1