The PLLs on newer Allwinner SoC's, such as the A31 and A23, have a N multiplier factor that starts from 1, not 0. This patch adds an option to the factor clk driver's config data structures to specify the base value of N. Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> Acked-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> --- drivers/clk/sunxi/clk-factors.c | 2 +- drivers/clk/sunxi/clk-factors.h | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c index 3806d97..2057c8a 100644 --- a/drivers/clk/sunxi/clk-factors.c +++ b/drivers/clk/sunxi/clk-factors.c @@ -62,7 +62,7 @@ static unsigned long clk_factors_recalc_rate(struct clk_hw *hw, p = FACTOR_GET(config->pshift, config->pwidth, reg); /* Calculate the rate */ - rate = (parent_rate * n * (k + 1) >> p) / (m + 1); + rate = (parent_rate * (n + config->n_start) * (k + 1) >> p) / (m + 1); return rate; } diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h index 02e1a43..d2d0efa 100644 --- a/drivers/clk/sunxi/clk-factors.h +++ b/drivers/clk/sunxi/clk-factors.h @@ -15,6 +15,7 @@ struct clk_factors_config { u8 mwidth; u8 pshift; u8 pwidth; + u8 n_start; }; struct clk_factors { -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html