Quoting Damien Le Moal (2020-12-10 06:02:51) > > Finally the last two patches updates the k210 nommu defconfig to include > the newly implemented drivers and provide a new default configuration > file enabling SD card support. > > A lot of the work on the device tree and on the K210 drivers come from > the work by Sean Anderson for the U-Boot project support of the K210 > SoC. Sean also helped with debugging many aspects of this series. > > A tree with all patches applied is available here: > https://github.com/damien-lemoal/linux, k210-sysctl-v20 branch. > A demonstration of this series used on a SiPeed MAIX Dock > board together with an I2C servo controller can be seen here: > https://damien-lemoal.github.io/linux-robot-arm/#example > > This tree was used to build userspace busybox environment image that is > then copied onto an SD card formatted with ext2: > https://github.com/damien-lemoal/buildroot > Of note is that running this userspace environment requires a revert of > commit 2217b982624680d19a80ebb4600d05c8586c4f96 introduced during the > 5.9 development cycle. Without this revert, execution of the init > process fails. A problem with the riscv port of elf2flt is suspected but > not confirmed. I am now starting to investigate this problem. > > Reviews and comments are as always much welcome. What's the merge plan for this series? I'd like to apply the clk patches but they're combined with the sysctl driver so I guess I can't?
