[PATCH v3 8/9] arm64: tegra: Add QSPI nodes on Tegra194

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tegra194 has 2 QSPI controllers.

This patch adds DT node for these 2 QSPI controllers.

Signed-off-by: Sowjanya Komatineni <skomatineni@xxxxxxxxxx>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 25f36d6..63ed788 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -609,6 +609,30 @@
 			status = "disabled";
 		};
 
+		spi@3270000 {
+			compatible = "nvidia,tegra194-qspi";
+			reg = <0x3270000 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_QSPI0>,
+				 <&bpmp TEGRA194_CLK_QSPI0_PM>;
+			clock-names = "qspi", "qspi_out";
+			resets = <&bpmp TEGRA194_RESET_QSPI0>;
+			reset-names = "qspi";
+			status = "disabled";
+		};
+
+		spi@3300000 {
+			compatible = "nvidia,tegra194-qspi";
+			reg = <0x3300000 0x1000>;
+			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&bpmp TEGRA194_CLK_QSPI1>,
+				 <&bpmp TEGRA194_CLK_QSPI1_PM>;
+			clock-names = "qspi", "qspi_out";
+			resets = <&bpmp TEGRA194_RESET_QSPI1>;
+			reset-names = "qspi";
+			status = "disabled";
+		};
+
 		pwm1: pwm@3280000 {
 			compatible = "nvidia,tegra194-pwm",
 				     "nvidia,tegra186-pwm";
-- 
2.7.4




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux